Fuse Between Runs Question

[meade916]

that looks good man, do that. Thats pretty much how all 7 of my batterys are hooked up. Forget the amps, they all have onboard fuses but right AT each positive terminal i always use something that will burn faster then wire (and the car )

i would also ground the back "bank" to the frame and also that front bat to the frame as well as to eachother.

[t-rob]

i gotta thank you steve

i looked at some of ur pics from when you had the old red ones in

and then when you installed the powermasters

and i thought thats how you did it..

but one question..

when you ground the back 2 batts, do you ground both seperatly or just run a wire from neg to each then ground?

[meade916]

i gotta thank you steve

i looked at some of ur pics from when you had the old red ones in

and then when you installed the powermasters

and i thought thats how you did it..

but one question..

when you ground the back 2 batts, do you ground both seperatly or just run a wire from neg to each then ground?

i would just connect them together and make the run to the front....now that they are together, just run a single 1/0 from the nearest terminal to a good frame ground and do the same up front. Might be overkill for what you are running but i like overkill When your system grows you are already halfway there if you go over the top when you dont need to

[t-rob]

soo fig 1

or fig 2

what one would you do?

[CUT BUDDY]

Steve, why use frame grounding?

[Derrick824]

Steve, why use frame grounding?

Might be overkill for what you are running but i like overkill

Overkill FTW!

[t-rob]

Steve, why use frame grounding?

frame is one of th best possible grounds if not thee best