99fullsizechevy Posted January 17, 2012 Author Report Share Posted January 17, 2012 So the first box in this post was to big to fit in the guys car lol oops, so luckily another guy stopped by and saw it and offered me 50 bucks and this jl j2 500.1 for it so I tol him to bring me the money and amp lol so now I have to build him another box this time he gave me the specs 32 wide 16 tall and 24 deep... I made him let me measure it as well and those specs look alot better.. Anyone wanna throw those specs in torres in see what they can come up with? 2 15s and he wants it ported to 33-36 hz.. Going to be small Quote Laying frame soon.. System has to wait Link to comment Share on other sites More sharing options...
412 CVX Posted January 17, 2012 Report Share Posted January 17, 2012 tell him to trade his 15's for 12's or go with a single 15. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
Socky Posted January 17, 2012 Report Share Posted January 17, 2012 So the first box in this post was to big to fit in the guys car lol oops, so luckily another guy stopped by and saw it and offered me 50 bucks and this jl j2 500.1 for it so I tol him to bring me the money and amp lol so now I have to build him another box this time he gave me the specs 32 wide 16 tall and 24 deep... I made him let me measure it as well and those specs look alot better.. Anyone wanna throw those specs in torres in see what they can come up with? 2 15s and he wants it ported to 33-36 hz.. Going to be small lmao thats the exact same measurements the 2 15 box i have in my truck is, its way to small, and tuned at 33hz but way to peaky, if it was me, i would either downsize or try to fine more room. What vehicle is it going in? Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
99fullsizechevy Posted January 17, 2012 Author Report Share Posted January 17, 2012 96 Camry, he won't let me build the box in the trunk of anything says it has to be ae to be easily taken out Quote Laying frame soon.. System has to wait Link to comment Share on other sites More sharing options...
Socky Posted January 17, 2012 Report Share Posted January 17, 2012 (edited) all i can say, is that the box will be hella peaky and have hardly and low output. I would try to talk him into building it into the trunk or else he wont get the response that he expects, or make it a two piece box that bolts together in the trunk. Edited January 17, 2012 by Socky Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
99fullsizechevy Posted January 18, 2012 Author Report Share Posted January 18, 2012 I never though about two boxes.. But he like normal rap which isn't many lows.. But here Is what I came up with yes it's quite small Quote Laying frame soon.. System has to wait Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.