donpablo Posted January 28, 2012 Report Posted January 28, 2012 So i went to measure for the length needed to do the big 3 but i cant even access my alt its like so packed in there under the headers its crazy so just curious if if any one has done this on a 06 plus ford explorer 2015 F-150 Platnuim
412 CVX Posted January 28, 2012 Report Posted January 28, 2012 you might have to take the wheel off Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
donpablo Posted January 28, 2012 Author Report Posted January 28, 2012 My link My link 2015 F-150 Platnuim
donpablo Posted January 28, 2012 Author Report Posted January 28, 2012 So the power wire runs to the back and down i cant even get a visual of the bolt 2015 F-150 Platnuim
varietyguy Posted January 28, 2012 Report Posted January 28, 2012 gonna have to get underneath 1992 Mazda 323 http://www.stevemead...323-wall-build/
412"ranger Posted January 28, 2012 Report Posted January 28, 2012 Your going to have to take off the alt to get to the power wire with a 10mm bolt on the back.
donpablo Posted January 28, 2012 Author Report Posted January 28, 2012 Lol i have a headache just thinking about taking the whole alt off 2015 F-150 Platnuim
Dailyspl Posted January 28, 2012 Report Posted January 28, 2012 That sucks 99 expedition Two 15 inch dc audio xls Ported box tunned to 34 hrtz Soundstream pcx.2000d(better amp soon) 0 gauge big three(soon) Yellow top,(more batts soon)
412"ranger Posted January 28, 2012 Report Posted January 28, 2012 its not that bad take off the belt and the 2 bolt on the alt on the bottom and the bracket on the side there on the driver side and it should come out.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.