onyx1silverado Posted February 1, 2012 Report Share Posted February 1, 2012 I have a Pioneer AVH P4200DVD that has the sub out with frequency settings and an RF T5001 bd-cp with a crossover (obviously). How would you adjust these with or without the CC-1? I guess this could be a general amp setup question too. Quote Pioneer AVH-P4200DVD Rockford Fosgate T5001 bd-cp 2 DC level 2 12's Focal Access Components in the front Focal Access Coax in the rear doors Rockford Fosgate Punch Boosted Rail 4 channel rms 4x75 XS Power D3400 under the hood Knuconceptz Ultra Fleks Power & Ground Link to comment Share on other sites More sharing options...
Rebel4055 Posted February 1, 2012 Report Share Posted February 1, 2012 You could just max the LPF on the amp and use the LPF on the HU. Quite a few people do that. Including me. Quote Rest In Peace mother. January 22, 1955 - February 14, 2013 http://www.stevemeadedesigns.com/board/user/35351-megrch/ Link to comment Share on other sites More sharing options...
DTS909 Posted February 1, 2012 Report Share Posted February 1, 2012 You could just max the LPF on the amp and use the LPF on the HU. Quite a few people do that. Including me. Might have to try that out. Quote VM-1 Pioneer DEH-80PRS Hertz HSK 165XL Arc Audio KS 300.2 Linear Power 1002 Full Mods Fi Audio Q 10s Sundown Audio Scv 3000 Big 3 XS Power D5100 Juice Box 20AH Singer Alternator Sky High Wire <p>My Ebay feedback. http://feedback.ebay...tab=AllFeedback Link to comment Share on other sites More sharing options...
Mile High Guy Posted February 4, 2012 Report Share Posted February 4, 2012 You could just max the LPF on the amp and use the LPF on the HU. Quite a few people do that. Including me. Does that only work with certain headunits? Or will any headunit crossover freq. setting override the crossover setting on an amp if the headunit setting is lower? Quote Headunit - Alpine 9857 Mids & Highs - T165,T1692 Mids & Highs Amp - T400-4 Subs - 2 12" DC Audio Level 3 M2s Sub Amp - T1500-1bdcp Alternator - MechMan 220a Wiring - 1/0ga XS Power Batteries - 2 Optima Yellow Tops Read the fucking manual. Jesus Christ. I dunno about that Steve... Chuck Norris doesnt even do push-ups, he just pushes the earth down. Link to comment Share on other sites More sharing options...
Rebel4055 Posted February 4, 2012 Report Share Posted February 4, 2012 Some headunits don't have a LPF so it can only work with some HU. Quote Rest In Peace mother. January 22, 1955 - February 14, 2013 http://www.stevemeadedesigns.com/board/user/35351-megrch/ Link to comment Share on other sites More sharing options...
n8ball2013 Posted February 4, 2012 Report Share Posted February 4, 2012 You could just max the LPF on the amp and use the LPF on the HU. Quite a few people do that. Including me. Does that only work with certain headunits? Or will any headunit crossover freq. setting override the crossover setting on an amp if the headunit setting is lower? if the amp isnt receiving the signal it cant product that signal. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.