Pasta Prime Posted February 21, 2012 Report Posted February 21, 2012 So I got a new Skar VVX15D2 and decided I wanted to try a TLine. Here is what I have come up with. To the best of my calculations It should be tuned to 28hz The port is 19x8 and ~ 130" long. This is my first stab so any help or suggestions appreciated. Quote New build coming........ YouTube:http://www.youtube.c...6?feature=guide Old Build Log: http://www.stevemead...d-on-the-cheap/ Old Screen name: Redrebel66
One Way Posted February 21, 2012 Report Posted February 21, 2012 U should try putting the sub more to the left where the line starts Quote T-line build- http://www.stevemead...e-t-line-build/
Pasta Prime Posted February 21, 2012 Author Report Posted February 21, 2012 Ok so its better closer to the start of the line rather than closer to the port? Quote New build coming........ YouTube:http://www.youtube.c...6?feature=guide Old Build Log: http://www.stevemead...d-on-the-cheap/ Old Screen name: Redrebel66
412 CVX Posted February 21, 2012 Report Posted February 21, 2012 That's where it's supposed to go. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
One Way Posted February 21, 2012 Report Posted February 21, 2012 (edited) Ye that's the point of the line. The whole line is the port Edit* also add 45s on the corner where the sub will go. Lastly wut is the sd of the speaker? Edited February 21, 2012 by One Way Quote T-line build- http://www.stevemead...e-t-line-build/
Pasta Prime Posted February 21, 2012 Author Report Posted February 21, 2012 Ok so move the sub to the begining of the line and 45 the corners. The SD is ~155 Quote New build coming........ YouTube:http://www.youtube.c...6?feature=guide Old Build Log: http://www.stevemead...d-on-the-cheap/ Old Screen name: Redrebel66
412 CVX Posted February 21, 2012 Report Posted February 21, 2012 beginning of the line AKA close to the port lol. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
Sanitarium Posted February 21, 2012 Report Posted February 21, 2012 sd of 155 with a port area of 152.. sounds good to me, but i'd try to find that extra 3 square inches for the port. Other then that, design is solid, move the sub to the end as mentioned and roll with it. Quote
One Way Posted February 21, 2012 Report Posted February 21, 2012 (edited) sd of 155 with a port area of 152.. sounds good to me, but i'd try to find that extra 3 square inches for the port. Other then that, design is solid, move the sub to the end as mentioned and roll with it. I think he will be ok like that it's not exactly room acoustics, it's in a car Edited February 21, 2012 by One Way Quote T-line build- http://www.stevemead...e-t-line-build/
Pasta Prime Posted February 21, 2012 Author Report Posted February 21, 2012 (edited) beginning of the line AKA close to the port lol. Oh ok I get it. lol Thats why I come here for advise! sd of 155 with a port area of 152.. sounds good to me, but i'd try to find that extra 3 square inches for the port. Other then that, design is solid, move the sub to the end as mentioned and roll with it. So is that 3 sq in going to make that much of a difference? I could gain it by adding a 1/4" to my height. Edited February 21, 2012 by redrebel66 Quote New build coming........ YouTube:http://www.youtube.c...6?feature=guide Old Build Log: http://www.stevemead...d-on-the-cheap/ Old Screen name: Redrebel66
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.