DavidPeck Posted March 20, 2012 Report Share Posted March 20, 2012 i need a design for 4 orion hcca 15s. using 4 hcca 5000d's for amps and need about 32-34 hz and i want sub up port back. i have alot of room as its going in a ford excursion. sub displacement - .37 i would like about 4.5 cubes each and for the port it says 16x3 inches but that seems pretty small. Link to comment Share on other sites More sharing options...
DRock Posted March 21, 2012 Report Share Posted March 21, 2012 i don't know if you do bandpass boxes, but if you do i need a design for a mayhem 12''. its for a 95 Honda civic max dimensions are (LxWxH) 35x22x16.....thanks in advance woofer specs Coils Dual 1 Ω / Dual 2 Ω Re0.7 Ω / 1.4 Ω Fs40.7 Hz / 39.7 Hz Qms5.16 / 5.28 Qes0.23 / 0.22 Qts0.22 / 0.21 Mms201g / 211 g Sd480 cm^2 Vas24.5 l SPL90.4 / 90.4 1W/1m Bl17.7 / 26.2 Tesla Meters Xmax30mm (one-way) RMS2500w Ported enclosure 1.75-3CF Mounting depth 7.75" Driver Cutout Diameter 11.150" Driver Overall Diameter 12.500" Driver Displacement 0.18 CF Weight 65 lbs Link to comment Share on other sites More sharing options...
412 CVX Posted March 21, 2012 Report Share Posted March 21, 2012 lol there's a few different types of bandpass boxes Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
DRock Posted March 21, 2012 Report Share Posted March 21, 2012 lol there's a few different types of bandpass boxes i realize that when i did my research and i think a 4th order will work because i want it blowing through my rear deck of the car Link to comment Share on other sites More sharing options...
carshateme Posted April 10, 2012 Report Share Posted April 10, 2012 4th order, 12" DC level 3, Maximum dim: 34x15x22ish Sub displacement: .32 Tuning preference: Whatever you think sounds good for rap. Being overpowered. New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center] Link to comment Share on other sites More sharing options...
fli_noize Posted April 11, 2012 Report Share Posted April 11, 2012 So I have one for you. 2 Fi 15" BTL's, parameters below. I have the basic parameters of 46" Wide x 35" Deep x 16" High using 1" MDF I want about 32HZ tuning slot port. Thanks. Oh going to be running 2500 watts per sub. Bone Stock 2006 Dodge Magnum SRT-8 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.