teardrop Posted March 2, 2012 Author Report Share Posted March 2, 2012 Nice thanks buddy that's awesome can those ports face the front so I can seal the wall off? Thanks again your a big help! yea they will have to bend but yes they can come out the front they just need to be 13 in long Link to comment Share on other sites More sharing options...
teardrop Posted March 2, 2012 Author Report Share Posted March 2, 2012 I see the ports are 12.25" and the depth of the box is 16.5" so the ports will fit but will it affect the tuning but I can't wait to get started now looks sick. sorry i goofed that port length its suposed to be 13 i dont know how i didnt catch that Link to comment Share on other sites More sharing options...
teardrop Posted March 2, 2012 Author Report Share Posted March 2, 2012 4 spl audio sp3 12's (dual 2 ohm) 1000watt Rms(pair) Max dimensions: 4ft wide 3ft tall deep as needed Sub specs: Fs (hs): 26.3 Qms: 769.5 Vas (ft): 2.111 Xmax (mm): 13.25 Qes: 0.778 Bl : 13.05 Qts: 0.706 1000 Rms 2 Punch T1 1500's for power if needed I'd like it in a wall. Port & speaker placement doesn't matter. Just want it loud, low, with good sound. It's going in a Yukon. Thx whats your sub displacment Link to comment Share on other sites More sharing options...
wizart383 Posted March 2, 2012 Report Share Posted March 2, 2012 Two Skar Audio vvx 8's Skar Audio sk1500.1 4th order Max dimensions 11.5" height 42" width 16" depth need sub info Cutout Diameter : 7-3/8" Mounting Depth : 5.5" Displacement : 0.13 Ft^3 http://www.skaraudio.com/index.php/products/vvx-8.html Link to comment Share on other sites More sharing options...
teardrop Posted March 2, 2012 Author Report Share Posted March 2, 2012 Two Skar Audio vvx 8's Skar Audio sk1500.1 4th order Max dimensions 11.5" height 42" width 16" depth need sub info Cutout Diameter : 7-3/8" Mounting Depth : 5.5" Displacement : 0.13 Ft^3 http://www.skaraudio...ucts/vvx-8.html what way you want subs and port? Link to comment Share on other sites More sharing options...
DaveBoutilier Posted March 2, 2012 Report Share Posted March 2, 2012 So will the 13" inch ports work in the front if the depth is 16.5" or do I have to keep the ports away from the back wall? It would give me 3.5" off the back wall or just use an elbow and aim them at the subs? Sorry to bug Ill leave you alone after this one haha! current score-156.6 sealed on the dash 4 ZV3 15s 1 AB 1100.1 Link to comment Share on other sites More sharing options...
Sid420 Posted March 2, 2012 Report Share Posted March 2, 2012 I have one SoundStream SPLX-HF 15". Running on two SoundStream TX1.1300D (one per coil) going to seal off from trunk. I want sub and port facing forward. It is going in a ford contour. Max dimensions are 39w X 31L X 22H Specs on sub are: series wired SPLX-152HF Fs (hz) 35.96 Qms 6.476 Vas (ft³) 87.56 Cms (mm/n) 0.0794 Mms (g) 247.1 Xmax (mm) 13.00 Xmech (mm) 19.50 Piston Diameter (in) 13.19 Sd (in²) 136.6 Qes 0.503 Re (Ω) 2.95 Z (Ω) 4 BL (Gauss) 18.09 Rms Power (watts) 1,250 Qts 0.467 NO (%) 0.78 1w/1m SPL (dB) 90.95 Voice Coil Diameter (in) 3" Impedance (Ω) DVC 2Ω M-vd (ft³) 0.298 Measurements SPLX-152HF Overall Diameter 15.25 Overall Height 9.25 Mounting Depth 8.375 Cutout Diameter 14.125 Motor Diameter 7.875 Motor Height 3.5 Flange Width 0.75 Flange Height 0.625 Weight (lb). 35 I want tuned to 31 hz Link to comment Share on other sites More sharing options...
wizart383 Posted March 2, 2012 Report Share Posted March 2, 2012 Two Skar Audio vvx 8's Skar Audio sk1500.1 4th order Max dimensions 11.5" height 42" width 16" depth need sub info Cutout Diameter : 7-3/8" Mounting Depth : 5.5" Displacement : 0.13 Ft^3 http://www.skaraudio...ucts/vvx-8.html what way you want subs and port? I was thinking subs on the sides and port in the middle Link to comment Share on other sites More sharing options...
Slim337 Posted March 2, 2012 Report Share Posted March 2, 2012 4 spl audio sp3 12's (dual 2 ohm) 1000watt Rms(pair) Max dimensions: 4ft wide 3ft tall deep as needed Sub specs: Fs (hs): 26.3 Qms: 769.5 Vas (ft): 2.111 Xmax (mm): 13.25 Qes: 0.778 Bl : 13.05 Qts: 0.706 1000 Rms 2 Punch T1 1500's for power if needed I'd like it in a wall. Port & speaker placement doesn't matter. Just want it loud, low, with good sound. It's going in a Yukon. Thx whats your sub displacment Link to comment Share on other sites More sharing options...
Slim337 Posted March 2, 2012 Report Share Posted March 2, 2012 Sorry I'm still new 2 this stuff. I think this is what u mean. 2cu ft ported factory spec Overall diameter: 12.626 Overall height: 7.5 Mounting depth: 6.75 Cut out diameter: 11.125 Flange width: 0.75 Flange height: 0.75 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.