Box help

[Jskiles]

Ok so I'm ordering a a Tfs igor 18 (dc lvl4) this week and I'm lost on building ported boxes lol. I've always built sealed boxes and I was amazed about 2 years ago when I got back into car audio and I heard some ported enclosures. Anyways the subwoofer is 1000 watts rms and I'm using a hifonics brz1200.1D amp dual 2 ohm gonna run it to 1 ohm. Can someone tell me a good box designer or make me a design?

I was going to order a dc lvl3 18 but I decided to get this instead.

It's going in a 2005 Chevy equinox H:35 W:32 L:28.

[Joe X]

So check this out, based in DC Audio L4 Specs, Port back/Sub up:

Enclosure Specifications:

Fb = 35.084 Hz

Vb = 6 ft^3

External Height = 25 in

External Width = 32 in

External Depth = 21.5 in

Port Width = 4 1/2 in

Cut List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 32 x 21 1/2

Side 1 = 20 x 22 3/4

Side 2 = 20 3/4 x 22 3/4

Front = 26 3/4 x 22 3/4

Back = 32 x 22 3/4

L Port Internal Assembly Parts:

Front to Back = 15 1/2 x 22 3/4

Extension = 5 1/2 x 22 3/4

Let me know any questions.

[Jskiles]

So check this out, based in DC Audio L4 Specs, Port back/Sub up:

Enclosure Specifications:

Fb = 35.084 Hz

Vb = 6 ft^3

External Height = 25 in

External Width = 32 in

External Depth = 21.5 in

Port Width = 4 1/2 in

Cut List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 32 x 21 1/2

Side 1 = 20 x 22 3/4

Side 2 = 20 3/4 x 22 3/4

Front = 26 3/4 x 22 3/4

Back = 32 x 22 3/4

L Port Internal Assembly Parts:

Front to Back = 15 1/2 x 22 3/4

Extension = 5 1/2 x 22 3/4

Let me know any questions.

Thanks man!!! Should I just need one sheet of mdf or 2?

[Joe X]

So check this out, based in DC Audio L4 Specs, Port back/Sub up:

Enclosure Specifications:

Fb = 35.084 Hz

Vb = 6 ft^3

External Height = 25 in

External Width = 32 in

External Depth = 21.5 in

Port Width = 4 1/2 in

Cut List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 32 x 21 1/2

Side 1 = 20 x 22 3/4

Side 2 = 20 3/4 x 22 3/4

Front = 26 3/4 x 22 3/4

Back = 32 x 22 3/4

L Port Internal Assembly Parts:

Front to Back = 15 1/2 x 22 3/4

Extension = 5 1/2 x 22 3/4

Let me know any questions.

Thanks man!!! Should I just need one sheet of mdf or 2?

It depends on how they plan the cuts, I would recommend printing the cut sheet list and let the guys selling figure it out.

Also if you can get some dowel rod for front to back bracing that would be best.