TheNewbie Posted March 15, 2012 Report Share Posted March 15, 2012 Is there enough room for the port to push outward? I mean it has room to go to the side ect, just don't want to much back pressure, I can move it back more if needed, but will cause complications.. Inputs appreciated By bassheadryan at 2012-03-14 Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
TheNewbie Posted March 15, 2012 Author Report Share Posted March 15, 2012 I know this could be a horrible question.. was just curious wanna make sure everythings good Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
greg662 Posted March 15, 2012 Report Share Posted March 15, 2012 I have heard if your port is say 4 inches wide you want at least 4 inches of space but I'm no expert Quote 2 15" DC LVL 5' crescendo 5500 yellow top under the hood and two xs power d3100 Big three upgrade Rockford Fosgate T162S components in front Rockford Fosgate T152 in the back Dynamat everywhere Link to comment Share on other sites More sharing options...
TheNewbie Posted March 15, 2012 Author Report Share Posted March 15, 2012 I have heard if your port is say 4 inches wide you want at least 4 inches of space but I'm no expert Well your the first person to reply, so i'll go measure just incase. Thanks for the input. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
greg662 Posted March 15, 2012 Report Share Posted March 15, 2012 no problem but like I said I'm no expert so I would wait for some more input befor doin anything major Quote 2 15" DC LVL 5' crescendo 5500 yellow top under the hood and two xs power d3100 Big three upgrade Rockford Fosgate T162S components in front Rockford Fosgate T152 in the back Dynamat everywhere Link to comment Share on other sites More sharing options...
TheNewbie Posted March 15, 2012 Author Report Share Posted March 15, 2012 no problem but like I said I'm no expert so I would wait for some more input befor doin anything major I completely understand man, I just appreciate some input from someone. Ports 3 3/4 inch wide, I have just about that length maybe abit more. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
larrys95civic Posted March 15, 2012 Report Share Posted March 15, 2012 I'd try it out, hard to say if it's going to choke it off until you try it out. Some set ups need more, some need less. I spent 2 hours with the tl pushing my box closer and farther away to the back of my trunk so see what improvements it would make. I ended up about 8 inches away. Quote Team Superior SPL Former Installer at Driven Sound & Security http://www.drivenss.com All kinds of forsale threads http://www.stevemeadedesigns.com/board/topic/164247-amps-subs-and-misc/#entry2383262 http://www.stevemeadedesigns.com/board/topic/164430-polk-audio-sda6000-sound-bar/#entry2386634 http://www.stevemeadedesigns.com/board/topic/164279-3-michael-kors-watches/#entry2383983 http://www.stevemeadedesigns.com/board/topic/164549-more-items-from-storage/ http://www.stevemeadedesigns.com/board/topic/166967-dd-9518s-amps-kenwood-custom-explorer-dash/ If someone is feeling generous I'd love an original sig LOL Link to comment Share on other sites More sharing options...
One Way Posted March 15, 2012 Report Share Posted March 15, 2012 dang now that everything is built it looks a lil smaller than the mock up, hopefully u dont have any problems Quote T-line build- http://www.stevemead...e-t-line-build/ Link to comment Share on other sites More sharing options...
TheNewbie Posted March 15, 2012 Author Report Share Posted March 15, 2012 Well.. I can get about.. 5 inches and it's a hatch so it should have airflow both going up, and going tothe sides. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
larrys95civic Posted March 15, 2012 Report Share Posted March 15, 2012 Well.. I can get about.. 5 inches and it's a hatch so it should have airflow both going up, and going tothe sides. Should be fine, toss a sub in and lets get to those vids! LOL Quote Team Superior SPL Former Installer at Driven Sound & Security http://www.drivenss.com All kinds of forsale threads http://www.stevemeadedesigns.com/board/topic/164247-amps-subs-and-misc/#entry2383262 http://www.stevemeadedesigns.com/board/topic/164430-polk-audio-sda6000-sound-bar/#entry2386634 http://www.stevemeadedesigns.com/board/topic/164279-3-michael-kors-watches/#entry2383983 http://www.stevemeadedesigns.com/board/topic/164549-more-items-from-storage/ http://www.stevemeadedesigns.com/board/topic/166967-dd-9518s-amps-kenwood-custom-explorer-dash/ If someone is feeling generous I'd love an original sig LOL Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.