nuboot Posted April 28, 2012 Author Report Share Posted April 28, 2012 I built it didn't like the way it performed daily but not on the Termlab. Rebuilt using aeros. And much much better will post pics of the rebuild shortly. HEADUNIT:Pioneer AVic d3 WIRING: 8 runs of 1/0 knu gnd and pwr BATTERIES: 1 shuriken bt80 upfront 4 in the back COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s AMPS: 2 powerbass xa3000d powerbass Asa 400.4 SUBS: 4 db drive plw 15s ENCLOSURE:12.7 cubes 32hz ALT: 150a stock for now VEHICLE:05 chevy trailblazer sitting on 24s iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289 Link to comment Share on other sites More sharing options...
Bmike Posted April 28, 2012 Report Share Posted April 28, 2012 Im intrested in seeing how this turned out for you , also curious to know if you did any pods or if you used factory placement for your powerbass 6.5 components. If you dont mind could we see some pics of this as well , thanks. 2007 trailblazer lthead unit- pioneer p4300dvd crescendo ft-1 supertweeters pioneer m650 pros audiocontrol 2xs crossover Rockford fosgate p200-2 highsrockford fosgate p400-2 mids1- fi btl 18amps- saz 3500battery- evermax in front, 2 9a31 dekas in rearwires all knuconceptz 1/0 and rcas Link to comment Share on other sites More sharing options...
CrazyCricket12 Posted April 28, 2012 Report Share Posted April 28, 2012 How did you get 48" wide? When I measure my trailblazer it was 45" wide in between the little wheel humps. Link to comment Share on other sites More sharing options...
nuboot Posted April 28, 2012 Author Report Share Posted April 28, 2012 I kinda rushed to make it to the soundoff. And during my burp I blew a sub I added my second baffle and some more bracing. Still gotta wrap the box just haven't decided what I am going to use. HEADUNIT:Pioneer AVic d3 WIRING: 8 runs of 1/0 knu gnd and pwr BATTERIES: 1 shuriken bt80 upfront 4 in the back COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s AMPS: 2 powerbass xa3000d powerbass Asa 400.4 SUBS: 4 db drive plw 15s ENCLOSURE:12.7 cubes 32hz ALT: 150a stock for now VEHICLE:05 chevy trailblazer sitting on 24s iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289 Link to comment Share on other sites More sharing options...
nuboot Posted April 28, 2012 Author Report Share Posted April 28, 2012 Im intrested in seeing how this turned out for you , also curious to know if you did any pods or if you used factory placement for your powerbass 6.5 components. If you dont mind could we see some pics of this as well , thanks. It turned out good to me my first setup did 146.2 @ 42hz then the rebuild did 150.3 at 41hz before I blew a sub. My 6.5s. Just sat in. When I deaden the doors I will send the pics to you How did you get 48" wide? When I measure my trailblazer it was 45" wide in between the little wheel humps. Well mines measured 47 between then I ripped up all the carpet but it was still a little to wide so the box sat a little crooked. Now the width is only 46 and it slides in easily HEADUNIT:Pioneer AVic d3 WIRING: 8 runs of 1/0 knu gnd and pwr BATTERIES: 1 shuriken bt80 upfront 4 in the back COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s AMPS: 2 powerbass xa3000d powerbass Asa 400.4 SUBS: 4 db drive plw 15s ENCLOSURE:12.7 cubes 32hz ALT: 150a stock for now VEHICLE:05 chevy trailblazer sitting on 24s iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289 Link to comment Share on other sites More sharing options...
Bmike Posted April 28, 2012 Report Share Posted April 28, 2012 nice score, cant wait to see more. were you able to get your batteries in without the loss of your back seat. 2007 trailblazer lthead unit- pioneer p4300dvd crescendo ft-1 supertweeters pioneer m650 pros audiocontrol 2xs crossover Rockford fosgate p200-2 highsrockford fosgate p400-2 mids1- fi btl 18amps- saz 3500battery- evermax in front, 2 9a31 dekas in rearwires all knuconceptz 1/0 and rcas Link to comment Share on other sites More sharing options...
nuboot Posted April 28, 2012 Author Report Share Posted April 28, 2012 I took out my back seats to get my old box.In but with my new box I was able to save my single seat. But I couldn't put the other seats back in so I built my batteries and amps where that seat was HEADUNIT:Pioneer AVic d3 WIRING: 8 runs of 1/0 knu gnd and pwr BATTERIES: 1 shuriken bt80 upfront 4 in the back COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s AMPS: 2 powerbass xa3000d powerbass Asa 400.4 SUBS: 4 db drive plw 15s ENCLOSURE:12.7 cubes 32hz ALT: 150a stock for now VEHICLE:05 chevy trailblazer sitting on 24s iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289 Link to comment Share on other sites More sharing options...
CrazyCricket12 Posted April 29, 2012 Report Share Posted April 29, 2012 I'm really anxious to see how this turns out and sounds! Link to comment Share on other sites More sharing options...
nuboot Posted April 29, 2012 Author Report Share Posted April 29, 2012 Well I pick my other subs up today. So hopefully by next weekend I will have dampened the truck and wrap the box and make a video HEADUNIT:Pioneer AVic d3 WIRING: 8 runs of 1/0 knu gnd and pwr BATTERIES: 1 shuriken bt80 upfront 4 in the back COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s AMPS: 2 powerbass xa3000d powerbass Asa 400.4 SUBS: 4 db drive plw 15s ENCLOSURE:12.7 cubes 32hz ALT: 150a stock for now VEHICLE:05 chevy trailblazer sitting on 24s iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.