kbreudi Posted December 16, 2007 Report Share Posted December 16, 2007 Ok im looking for a distrubution OR fuse block that takes 1/0 AWG in and at LEAST 2, 4 AWG out that does NOT use allen screws but accepts ring terminals instead. So far i can not find any Quote TEAM SUNDOWN 4 Nightshade 15"s 2 Sundown SAZ-4500 8 Deep Cycle batts 1998 Cadillac Catera SPLMAX CUP 2008 Fourth Place Overall Link to comment Share on other sites More sharing options...
Aaron813 Posted December 16, 2007 Report Share Posted December 16, 2007 You could custom make your own to fit any way you want just get a flat piece of aluminum or a lat pieces off copper drill and tap bolts to it Quote Link to comment Share on other sites More sharing options...
roscoe1129 Posted December 16, 2007 Report Share Posted December 16, 2007 Here ya go Distro Acc scroll down half way or so Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
Guest Nismofreak Posted December 16, 2007 Report Share Posted December 16, 2007 euro listed http://www.knukonceptz.com/productMaster.c...20Fuse%20Blocks cheap and great products!!!! Quote Link to comment Share on other sites More sharing options...
roscoe1129 Posted December 16, 2007 Report Share Posted December 16, 2007 no good nismo he doesnt want the set screw type, he wanted ring terminal Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
Guest Nismofreak Posted December 16, 2007 Report Share Posted December 16, 2007 no good nismo he doesnt want the set screw type, he wanted ring terminal o okay my bad lol Quote Link to comment Share on other sites More sharing options...
kbreudi Posted December 16, 2007 Author Report Share Posted December 16, 2007 Here ya goDistro Acc scroll down half way or so Are you talking about the stinger one thats made from acrylic? If so is it safe to have 1/0 on one side and two 4 awg on the other side even though there is only one input/putput Quote TEAM SUNDOWN 4 Nightshade 15"s 2 Sundown SAZ-4500 8 Deep Cycle batts 1998 Cadillac Catera SPLMAX CUP 2008 Fourth Place Overall Link to comment Share on other sites More sharing options...
roscoe1129 Posted December 16, 2007 Report Share Posted December 16, 2007 shouldnt be a problem as long as both 4 awg wires have their own ring Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
kbreudi Posted December 16, 2007 Author Report Share Posted December 16, 2007 shouldnt be a problem as long as both 4 awg wires have their own ring Ok good. Only reason i need this kind is because i get paranoyd when i use allen screw types. Even if they are secured. And for some reason the kicker distro block that came with my 1/0 kit wont fit the 1/0 gauge, i have to trip off like 1/8 of the strands Quote TEAM SUNDOWN 4 Nightshade 15"s 2 Sundown SAZ-4500 8 Deep Cycle batts 1998 Cadillac Catera SPLMAX CUP 2008 Fourth Place Overall Link to comment Share on other sites More sharing options...
Stephen Posted December 16, 2007 Report Share Posted December 16, 2007 maybe darvex.com or millonbuy.com Quote you can cook bacon shirtless if you're not a pussy...lol not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be. DC POWER Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.