need help please

[trpkkd]

Hi I have an old memphis power reference 12 and I can't find any enclosure recommendations I can find the specs and everything on their site but nothing about enclosures. I have it in a prefab box right now I know I know. That's why I want to find the recommendations so I can build my own box so if any of you have built a box for one and remember the dimensions that would awesome or know where I can find them I would be greatly appreciative thanks.

[Joe X]

What are the max dims you can fit, vehicle, and amp models?

[trpkkd]

I have a ford explorer so space isn't to much of a concern and right now I'm running a pioneer 760 the specs say the amp does 380 x 1 bridged at 4 ohms.

[trpkkd]

Any suggestions on how many cubes I should need? It does pretty good in the prefab box it shakes the whole damn truck on that little amp, but I'd like to get the most out of it I can.

Edited April 4, 2012 by trpkkd

[Joe X]

Ok here is a siggestion based on Memphis spec, use Torres calculator to make your own spec or build as follows:

Enclosure Specifications:

Fb = 35.031 Hz

Vb = 1.9 ft^3

External Height = 14 in

External Width = 28.25 in

External Depth = 15 in

Port Width = 2 1/4 in

Cut Sheet List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

Top & Bottom = 28 1/4 x 15

Left & Right Sides = 13 1/2 x 12 1/2

Front & Back = 28 1/4 x 12 1/2

L Port Internal Assembly Parts:

Front to Back = 11 1/4 x 12 1/2

Extension = 12 x 12 1/2

Assembly guide (generic dimensions):

Let me know any questions.

[trpkkd]

Ok thanks for the info. I love this forum.

[trpkkd]

Do you think I should build it sub up port back like the picture?

[Guest]

Do you think I should build it sub up port back like the picture?

Yes. Its an suv

[Joe X]

If you wanted to learn the Torres calculator I can also answer your questions.

Edited April 4, 2012 by Joe X

[trpkkd]

Cool thanks again for all the info guys.