Tebo Posted April 9, 2012 Report Share Posted April 9, 2012 they probably cant take much power and lack alot of midbass. Im going to assume the 3.5s are up front and the 6x9s are all in the back. Does that seem balanced at all? the front will get over powered like nothing, so replace them with 6s so atleast they will have a chance of keeping up Quote 04 dodge dakota ext cab 4x4 excessive amperage 300 amp alt with MONSTER stud =)sundown z v3 15 in a 4th order on aq2200sundown 100.4 2 way active...2 Prv audio 6mb200 & 2 re XXX tweetersdeka intimidatorkenwood x396big 3 1/0 knu wire back to deka intimidator Link to comment Share on other sites More sharing options...
BEEMDUB Posted April 9, 2012 Author Report Share Posted April 9, 2012 they probably cant take much power and lack alot of midbass. Im going to assume the 3.5s are up front and the 6x9s are all in the back. Does that seem balanced at all? the front will get over powered like nothing, so replace them with 6s so atleast they will have a chance of keeping up true theyre only rated at like 40watts rms......but currently its the 3.5s in the dash, 2 6x9s in the doors up front, and 2 6x9s in the rear deck...when I get the super tweets I wanted to glass them into the a pillars Quote Link to comment Share on other sites More sharing options...
BEEMDUB Posted April 13, 2012 Author Report Share Posted April 13, 2012 (edited) Ok last question which one of these two configurations should I use? Chan1front: 2 ST-200 super tweets__________OR_____________Chan1front: 1 st-200, 1 kicker 3.5 Chan2front: 2 kicker 3.5s_________________________________Chan2front: 1 st-200, 1 kicker 3.5 Chan3rear: 2 BA 6 x 9s__________________________________Chan3rear: 2 BA 6 x 9s Chan4rear: 2 BA 6 x 9s__________________________________Chan4rear: 2 BA 6 x 9s Edited April 13, 2012 by BEEMDUB Quote Link to comment Share on other sites More sharing options...
IBleedMusick Posted April 13, 2012 Report Share Posted April 13, 2012 I would run it just like this, very simple very clean and should sound good in the end. 4 Channel Amp - 50w x 4 @ 4 and 100w x 4 @ 2 Channels 1 & 2 - Supertweets mount them where the 3.5's on the dash are mounted now. Ditch the 3.5's because they would be pointless with your supertweets picking up the highs. Channels 3 & 4 - 6" Selenium Mids. Run it this way until you can get the funds for the 8" seleniums then you can run it then you would run it like this Channel 3 - 6" Seleniums Channel 4 - 8" Seleniums Doing it like this in the end will give you a nice blend of highs, mid range and mid bass. Running Supertweets and PA speakers require less power to get loud. I wouldn't run the by 9's or 3.5's at all. If you absolutely must, then run the by 9's but definitely scrap the idea to use the 3.5's at all and just put the supertweeters there. Quote 2013 Dodge Charger Build Log 1996 Ford Explorer XLT 5.0Build Log 2005 Honda Civic LX Coupe Build Log SMD SUPER SELLER!!!!My Selling Feedback Link to comment Share on other sites More sharing options...
LZTYBRN Posted April 13, 2012 Report Share Posted April 13, 2012 (edited) Ok last question which one of these two configurations should I use? Chan1front: 2 ST-200 super tweets__________OR_____________Chan1front: 1 st-200, 1 kicker 3.5 Chan2front: 2 kicker 3.5s_________________________________Chan2front: 1 st-200, 1 kicker 3.5 Chan3rear: 2 BA 6 x 9s__________________________________Chan3rear: 2 BA 6 x 9s Chan4rear: 2 BA 6 x 9s__________________________________Chan4rear: 2 BA 6 x 9s Neither really. You're always going to want to have the same drivers on 1 as you do on 2, and the same drivers you have on 3 as you do on 4. In other words, you want to have the same speakers on the right channels as you do on the left. I'd say just ditch the 3.5s. They probably aren't adding much anyway. Edited April 13, 2012 by LZTYBRN Quote Link to comment Share on other sites More sharing options...
tlh_360 Posted April 15, 2012 Report Share Posted April 15, 2012 (edited) if he gets the selenium 6s wont he need a bandpass filter or can they just be ran on full? Edited April 15, 2012 by tlh_360 Quote Link to comment Share on other sites More sharing options...
BEEMDUB Posted April 19, 2012 Author Report Share Posted April 19, 2012 if he gets the selenium 6s wont he need a bandpass filter or can they just be ran on full? I would think I would have to bandpass them....but another question...how many electronic crossovers would I have to have for 2 st-200s, and 4 6x9s...(I want 2 6x9s to be like 100hz to 250hz and then the other two to pick up from there) Quote Link to comment Share on other sites More sharing options...
BEEMDUB Posted April 19, 2012 Author Report Share Posted April 19, 2012 also would it at all be possible for me to run my speakers just off of the amp? My p400-4 has low and high pass filters on it I see... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.