988216855 Posted April 19, 2012 Report Share Posted April 19, 2012 how would i wire this volt meter.? http://www.ebay.com/itm/Blue-LCD-Digital-Voltmeter-Battery-Monitor-Panel-Meter-/320885851983?pt=LH_DefaultDomain_0&hash=item4ab649874f#ht_3135wt_1135 i just got it and i wanted to know which way to wire it. it has the black and red wire only. Quote Link to comment Share on other sites More sharing options...
Freshman6969 Posted April 19, 2012 Report Share Posted April 19, 2012 pretty sure its red to the amp pos and black is ground, then toss it on a switch, my guess Quote Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
SlamminBeats Posted April 19, 2012 Report Share Posted April 19, 2012 black is negative and red is positive, you need to buy some 16 gauge wire and splice it to make it longer. Wire to you amp power/ground inputs Quote Link to comment Share on other sites More sharing options...
988216855 Posted April 19, 2012 Author Report Share Posted April 19, 2012 pretty sure its red to the amp pos and black is ground, then toss it on a switch, my guess i was thinking positive to amp terminal and negative to the amp terminal as well. but i don't know if that's right or safe? but how would it turn on? i know some others come with a remote wire as well bu this one don't. Quote Link to comment Share on other sites More sharing options...
JeepGuy Posted April 19, 2012 Report Share Posted April 19, 2012 red=positive black=negetive Just wire up to to battery or the amplifier; positive to positive and negetive to negetive. Then calibrate with DMM. Quote - 1995 Jeep Wrangler - ALL UNDER MASS TRANSFORMATION! Link to comment Share on other sites More sharing options...
988216855 Posted April 19, 2012 Author Report Share Posted April 19, 2012 black is negative and red is positive, you need to buy some 16 gauge wire and splice it to make it longer. Wire to you amp power/ground inputs you answered what was thinking lol will it stay on all the time or only turn on when the amp turns on? Quote Link to comment Share on other sites More sharing options...
Guest Posted April 19, 2012 Report Share Posted April 19, 2012 if you wire it directly to amp, it'll stay on forever. you gotta throw it on a toggle switch or use a relay if you dont want to flip a switch every time. Quote Link to comment Share on other sites More sharing options...
Popwarhomie Posted April 19, 2012 Report Share Posted April 19, 2012 Red to switched ignition and black ground. Quote 2010 Focus coupe- 8 12" wall. 157.5@46hz 2016 Focus ST - SQ build. Link to comment Share on other sites More sharing options...
988216855 Posted April 19, 2012 Author Report Share Posted April 19, 2012 so would the Cadence 14 gauge speaker would be fine to use? Quote Link to comment Share on other sites More sharing options...
SlamminBeats Posted April 19, 2012 Report Share Posted April 19, 2012 it doesnt have a remote turn on, so its different than my volt meter, not sure how that works Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.