Ryan Christensen Posted June 9, 2014 Report Share Posted June 9, 2014 Vary nice! i loved my rodeo until the frame rusted threw. Keep up the amazing work Link to comment Share on other sites More sharing options...
Noel989 Posted June 10, 2014 Report Share Posted June 10, 2014 That port Looks sick! Build Log - http://www.stevemead...-cruiser-el-pt/ Link to comment Share on other sites More sharing options...
mrd6 Posted June 12, 2014 Author Report Share Posted June 12, 2014 Big updates and a video incoming!!! My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
mrd6 Posted June 12, 2014 Author Report Share Posted June 12, 2014 Okay so I'll start off with this: as I mentioned before, I didn't like the crescendos that much and wanted to go back to the tantrics but I didn't like how the yellow clashed with the rest of the truck lol So here was my solution to that problem... Took a sharpie to the edges to help things blend and started to mask it off. First coat. Second coat. Turns out that was enough. My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
mrd6 Posted June 12, 2014 Author Report Share Posted June 12, 2014 So it was time to do the rest! Set 'em up... And knock 'em down. And back in the doors. My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
mrd6 Posted June 12, 2014 Author Report Share Posted June 12, 2014 So lets see whats next...well I picked up one of these guys And then it was time for some testing.... My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
mrd6 Posted June 12, 2014 Author Report Share Posted June 12, 2014 So so far I have only messed with the front port a bit. I put the rear port in and have not played with that at all. Tried several front port and didnt get pictures of everything but here are a couple. And here are the scores for this setup as it sits today...all numbers are legal sealed on the dash. There is a low peak and a high peak with an ever so slight valley in between High peak: drops down to 152.x at 45hz but I didn't take a pic of that. Low peak: It also does a 155.0 at 29hz 154.0 at 27hz and It is just shy of a 150 at 20hz sealed on the dash its at 149.3...drivers window down its 152.x lol only outlaw number i've taken so far. Also, it has a pretty nice bandwidth of solid output, 150+ from 22hz to 64 I have alot more testing notes and graphs of frequency response with different front ports, if anyone really wants to see it i'll post some stuff up just let me know. But enough numbers...time for a video My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
mrd6 Posted June 12, 2014 Author Report Share Posted June 12, 2014 Okay so here it is. This was from last weekend's show. Video was made by my friend Luke. He is an awesome member of the northwest basshead community and makes alot of really good car audio videos. You should check out his youtube channel if you have a few minutes. Let me know what you think lol My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
CleanSierra Posted June 12, 2014 Report Share Posted June 12, 2014 I'll sub to this build. It looks like a damn wind tunnel and crazy violent. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
sencheezy Posted June 12, 2014 Report Share Posted June 12, 2014 That's fucking awesome man! Great build! 165db with 237 DC Volts 6 15" SSA Evils 3 HV Taramps T60k @.33 18 XS Power D3400s Add me on SC, FB, IG, and YT @ Sencheezy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.