CstrokerV Posted April 24, 2012 Report Share Posted April 24, 2012 So sometime this year after i get my four dc level3 10s mettered (may 16th hopefully) im getting them reconed to 15s..and need ideas for box design i have outside dimensions of 34 wide 37 high and around 42 deep...So..... My box idea was a tunnel at the bottom with the port on top, But the tunnel is only going to be 14 inches wide and i am not sure if that will be enough... Any input on this? so basically it will be a tunnel 32 inches deep by 14 wide with two 15s on one side two on the other with the port on the very top of the box or right above the tunnel.. Any idea on this design... My other idea was a 16 by 16 by 16 tunnel with one sub on each wall and then try to get the port on the back wall firing into the tunnel any idea with this one?? my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
CstrokerV Posted May 2, 2012 Author Report Share Posted May 2, 2012 um no opinions? lol its ok.. im dryer died so it will be a little longer to get them anyways haha my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.