Jump to content

New speakers on Stock Headunit?


Recommended Posts

....thats a $15 dash kit

SUBSCRIBE AT YOUTUBE! 18abVFL < CLICK!!

2005 Subaru Impreza

My build log.

Head unit- Kenwood Excelon KDC-X695

Front doors- Rockford Fosgate 6.5" Prime components

Rear doors- Rockford Fosgate 4" Punch coaxials

Sub amp- Audiopipe AP18001d

Subs- Two American Bass TNT 10"s

Box- 2.6 cubes @ 34hz, 36in of port

Big 3 & run of Raptor 1/0 to rear powercell

TEAM 808 UPSTATE NY.

ab1.png

Can it be heard 2 blocks away, thats how i rate systems.

Link to comment
Share on other sites

I have found you two options, if you don't have the money I recommend you stick with a single din aftermarket head unit and get this dash kit http://www.amazon.com/Metra-99-5716-Taurus-Sable-Harness/dp/B0002BEYFE/ref=pd_cp_e_0

or you can get the extra space for a double din and get this dash kit http://www.amazon.com/Metra-99-5718-Single-Installation-2000-2003/dp/B003E3QS2Y

But since I know you don't want to spend that kind of money stick with the first option.

Clarion CZ401

Power Acoustik LT-980/2

dbLink 8 gauge kit

DXi 104 4 ohm DVC x2

Sealed Enclosure

Link to comment
Share on other sites

I have found you two options, if you don't have the money I recommend you stick with a single din aftermarket head unit and get this dash kit http://www.amazon.co...E/ref=pd_cp_e_0

or you can get the extra space for a double din and get this dash kit http://www.amazon.co...3/dp/B003E3QS2Y

But since I know you don't want to spend that kind of money stick with the first option.

I have the climate control option so I cant use the one with the knobs I can only use the one that has a tempature guage also If I could I use the single din I would take it in a heart beat but $177 for a dash kit is a little to much and I like how my stock looks
Link to comment
Share on other sites

glass it dude take your climate control and work it into it

http://www.youtube.c...e1?feature=mheehttp://www.stevemead...87#entry1993187

JVC KD-R530 head unit

VVME INNO-D1500 sub amp

Kenwood KAC-8402 amplifierPioneer 2-way 6.5 X2 @ 4 ohms

DTI Audio 6.5 X2 @ 4 ohmsbox: 4.24 ft^3 tuned to 61 hertz (port walls fell off and dissapeared :( )

Link to comment
Share on other sites

Not trying to call anyone dumb or anything like that, but I don't think he knows how to fiberglass russell. I'm sure there's plenty places in florida he can take it to though that can fiberglass him one.

Clarion CZ401

Power Acoustik LT-980/2

dbLink 8 gauge kit

DXi 104 4 ohm DVC x2

Sealed Enclosure

Link to comment
Share on other sites

It will sound more clear, if you get a nice set of comps with cross overs. But a good set of mids can blow peoples mind.

Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell

Kenwood H/U

1/0 wire,

136 amp alt 200 ah batteries 12.7 daily

2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts

Mb quart 125.4 wired to 4 aura 6's

3.6 cube box tuned to 36 plays down to 23hz

Link to comment
Share on other sites

hey i didnt say he, himself, had to do it just to glass it

Edited by Junior Russell

http://www.youtube.c...e1?feature=mheehttp://www.stevemead...87#entry1993187

JVC KD-R530 head unit

VVME INNO-D1500 sub amp

Kenwood KAC-8402 amplifierPioneer 2-way 6.5 X2 @ 4 ohms

DTI Audio 6.5 X2 @ 4 ohmsbox: 4.24 ft^3 tuned to 61 hertz (port walls fell off and dissapeared :( )

Link to comment
Share on other sites

if you want a simple swap, just do coaxial speakers. unscrew old ones, screw in new ones. that simple. no need for fiberglass and shit. you guys are making it too fucking complicated and its pissing me off.

a stock headunit amp wont make anything sound great. sure you could get a line out converter to run an amp, but almost all of them convert a dirty as fuck signal. if you want to do an actual upgrade, you're going to have to spend the money for a dash kit and proper headunit and all the other necessary stuff.

Edited by Kranny
Link to comment
Share on other sites

Wrong kranny, if you actually kept up with meade you'd know that he's coming out with a LOC that actually works. If OP can't do/use any of the options we provided him, the best thing to do is for him to wait for meade to release his LOC.

Here it is! http://www.stevemeadedesigns.com/board/topic/135501-ninja-pic-more-smd-damore-products-soon/

Edited by Eduardo Andrade

Clarion CZ401

Power Acoustik LT-980/2

dbLink 8 gauge kit

DXi 104 4 ohm DVC x2

Sealed Enclosure

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1986 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...