MegaMan93 Posted May 12, 2012 Author Report Share Posted May 12, 2012 im just going to build a ported box inside of my trunk. Box Design H- 17 W- 38 D- 25, Port height- 15.5 port width- 4.5 port length- 19 physical port length- 18.25. sub displacment is .34, bracing displacment .2. the box is right a 6.05 after everything is said and done. its tuned at 33hz. what would be the cut sheet cause torres cut sheet is confusing. It says the front peice is 38 wide but shouldnt it be 32.75? cause the port is 4.5 wide and the would would be .75? juat need a little help on the cut sheet. thatnks huys.! Quote We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
BobbyG2 Posted May 12, 2012 Report Share Posted May 12, 2012 (edited) Sounds like just enough air space for those 15's. You might not have the absolute best lows as they can, but better than the sealed enclosure. You'll probably like it best facing rear, unless you want to seal off the trunk. Good luck man! Edited May 12, 2012 by BobbyG2 Quote *New vehicle and system coming soon.* Link to comment Share on other sites More sharing options...
MegaMan93 Posted May 12, 2012 Author Report Share Posted May 12, 2012 Yea. Lol I just need help on the cut sheet cause I don't want to f anything up. Any help would be much appreciated. Quote We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
BobbyG2 Posted May 12, 2012 Report Share Posted May 12, 2012 I suck with cut sheets, but there's loads of people here that have mastered it. A lot of people recommend Torres box calculator, it's linked in a sticky here in the sub/enclosure section. Read up in that thread and in the programs help file Quote *New vehicle and system coming soon.* Link to comment Share on other sites More sharing options...
Joe X Posted May 12, 2012 Report Share Posted May 12, 2012 Your port area is rather low. Quote Link to comment Share on other sites More sharing options...
MegaMan93 Posted May 12, 2012 Author Report Share Posted May 12, 2012 Your port area is rather low. ik man but i really cant go any much wider. Any wider my speakers will be touching. lol Quote We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
Joe X Posted May 13, 2012 Report Share Posted May 13, 2012 Right, so here is a cut sheet, all across double baffle: Enclosure Specifications: External Height = 17 in External Width = 38 in External Depth = 25 in Port Width = 4 1/2 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Front & Back (3 parts) = 38 x 17 Left & Right Sides = 22 3/4 x 15 1/2 Top & Bottom = 38 x 22 3/4 L Port Internal Assembly Parts: Front to Back = 17 1/2 x 15 1/2 Quote Link to comment Share on other sites More sharing options...
MegaMan93 Posted May 13, 2012 Author Report Share Posted May 13, 2012 ok thanks man much much appricated. Quote We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.