Jump to content
Second Skin Audio

new subs.. new problem


Recommended Posts

if you want to keep the same box, and if its a box problem, put 10" sono tubes behind every sub that are at least as long as the sub is deep. im not sure what length would be best though. that will help even out the pressure behind each sub.

thats what next.. apparently it helps alot and usually gains quite a bit, even tho its not built for numbers

1998 gmc extd cab

12 crossfire C710s

4 SAZ-4500s

3 Singer 400A alts
buncha mids/highs

Team Asshole

Link to comment
Share on other sites

doublecheck all subs and wiring

TEAM DC AUDIO

VEHICLE:98 chevy tahoe 2wd 3-4 drop

HEADUNIT:alpine 9886

PREAMP:arcaudio

FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door

KICKPANELS:jl audio 5 1/4

REAR DOORS: dd components 6 1/2s

HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors

SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV

SUB AMP: 2-dc7.5s

ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket

WIRE:10-runs 0g front to back

BATTERIES:6-d1400s

TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5.

Link to comment
Share on other sites

if you have access to a TL it might be interesting to look at the scores in different places inside the box. that would tell you if you are getting a ton more pressure in one area than another. might help you understand what is going on.

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Link to comment
Share on other sites

I do have a TL here, The thing that gets me,is the SA10s were fine, and they were getting quite a bit more power

Where should i place the TL? I dont want to keep playing it when the "problem" is happening, as im sure its not very good for the subs lol

1998 gmc extd cab

12 crossfire C710s

4 SAZ-4500s

3 Singer 400A alts
buncha mids/highs

Team Asshole

Link to comment
Share on other sites

dont do it at full tilt. just place it anywhere in the box, multiple places though. its just an idea to be able to look at pressures inside the box. nothing ive ever done but i would imagine it will help you understand what the problem is, if the box is indeed the problem.

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Link to comment
Share on other sites

i shall give that a try! i do need to rebuild baffle soon.. but it will still be either port accross top or some type of clamshell.. no side ports for me..

1998 gmc extd cab

12 crossfire C710s

4 SAZ-4500s

3 Singer 400A alts
buncha mids/highs

Team Asshole

Link to comment
Share on other sites

if you want to keep the same box, and if its a box problem, put 10" sono tubes behind every sub that are at least as long as the sub is deep. im not sure what length would be best though. that will help even out the pressure behind each sub.

^this. Cross directional loading was my first guess.

-Zach-

2010 Toyota Tundra
Full Hybrid Audio SQ

7" BDS on 37's

2000 Ford Expedition

160+ dB Green Turd -SOLD- :(

Link to comment
Share on other sites

if you want to keep the same box, and if its a box problem, put 10" sono tubes behind every sub that are at least as long as the sub is deep. im not sure what length would be best though. that will help even out the pressure behind each sub.

^this. Cross directional loading was my first guess.

still does it with 6 not hooked up, which eliminates it as a loading issue

1998 gmc extd cab

12 crossfire C710s

4 SAZ-4500s

3 Singer 400A alts
buncha mids/highs

Team Asshole

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 612 Guests (See full list)

×
×
  • Create New...