bassface Posted May 14, 2012 Report Share Posted May 14, 2012 My pioneer deh-99prs has 2 sub outs, My line driver has 1 sub in and 2 sub outs, Is there an adapter to go from 2 sub outs to 1 sub out or should i just skip the line driver and go strait to amp? Link to comment Share on other sites More sharing options...
bassface Posted May 14, 2012 Author Report Share Posted May 14, 2012 So I contacted both pioneer and Critical mass technical support about this issue, The pioneer guy seemed to just read the product description to me like he was readin it for the first time, and said it didnt look like it would work since it has 2 sub outputs and the line driver has 1 sub input. So that annoyed me because I paid good money for that line driver , so I called icontv (critical mass) and they told me Since anything below 100hz shares the same signal so i could just use a y connector from the 2 sub outs into the 1 input of the line driver/crossover. Ill say he was very helpful. So it is true you can just use a y connector to go from 2 to 1 sub outs and it wont hurt anything? Link to comment Share on other sites More sharing options...
bassface Posted May 15, 2012 Author Report Share Posted May 15, 2012 So anyone ever go from 2 subouts on headunit to 1 sub input on the line driver before? Link to comment Share on other sites More sharing options...
bassface Posted May 15, 2012 Author Report Share Posted May 15, 2012 OK Problem solved. Thanks for the help on this one guys. Link to comment Share on other sites More sharing options...
dolarbilz Posted May 15, 2012 Report Share Posted May 15, 2012 With 5 volts out on pionner..why need line driver? Which amp you using? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.