sundownz Posted May 15, 2012 Report Share Posted May 15, 2012 Production started this week. Typical lead-time is 90 days but I will say to be safe expect them at the end of August. I am going to go ahead and open up ordering since I know many of you have waited anxiously for the 2012 models to start rolling out. As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. I do feel pretty solid on this one as the new amp factory is working pretty quickly for us so far on the NS-1 models, though. SAZ-1500D v.3 : Pre-Order Price : $445.00 Regular Price : $525.00 SAX-125.4 : Pre-Order Price : $425.00 Regular Price : $500.00 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] All production amps will have the "tiffany" style RCA cables; these are NOT pictured on the prototypes. SAX-125.4 PHOTOS AND SPECS: ORIGINAL THREAD 8.30” x 2.32” x 11.02” -- WITHOUT MOUNTING FEET Factory tested power as follows @ 1 % : 138x4 at 4 203x4 at 2 438x2 at 4 * Hard to tell but there are small holes in the board on the right for the fan on the opposite side of the board to breathe. * 1500D v.3 and the 125.4 together * WOW * 99% of the crossovers... only lacking the 12/24dB slop switch. Fixed at 24 dB now. SAX-1500D v.3 PHOTOS AND SPECS: ORIGINAL THREAD SAZ-1500D: 8.30” x 2.32” x 16.53” -- WITHOUT MOUNTING FEET Little bit of testing in Derrick's Explorer -- using my Extech power clamp meter (which always reads low vs. separate meters method) : 26 Hz 46.6v 43.7A 2036 Watts 1.06 ohm 27Hz 48.2v 40.4a 1974 watts 1.19 ohms * The fan blows through the board to expel air out the sides of the amp. Will do a heck of a job in terms of cooling :thumbsup: Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
BobbyG2 Posted May 15, 2012 Report Share Posted May 15, 2012 Suhweet, as soon as I get my bonus at work I'm ordering one of those 125.4's! Quote *New vehicle and system coming soon.* Link to comment Share on other sites More sharing options...
Mario928 Posted May 15, 2012 Report Share Posted May 15, 2012 good price. I will pre order tomorrow. Quote Build Under Construction Head Unit = Kenwood DDX514 Amps = Kicker 750.1, Going to install Sundown 1500D v3 and Sundown 125.4 Battery = XS D3400 Wires = Kicker RCA's, 0 Gauge street wire and Stinger Mids and Highs = Stock Sub= Kicker L7 12" Alternator = 220 Mechman Sound Deadner= Fatmat and Stinger Road Kill Link to comment Share on other sites More sharing options...
LOWVOY Posted June 14, 2012 Report Share Posted June 14, 2012 (edited) Are we still looking at end of August for the 125.4? Edited June 14, 2012 by LOWVOY Quote Link to comment Share on other sites More sharing options...
sundownz Posted June 14, 2012 Author Report Share Posted June 14, 2012 Are we still looking at end of August for the 125.4? Yes. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
LOWVOY Posted June 15, 2012 Report Share Posted June 15, 2012 How long ago did the production of the 100.4 stop? Can't seem to find it anywhere Quote Link to comment Share on other sites More sharing options...
dcofer Posted June 17, 2012 Report Share Posted June 17, 2012 Ive been planning it pick up a 100.4 and a 1200 but this seems liek the way to go with this pre-order. How would one go about pre-ordering? I guess going direct would be the easiest way but do you just state in a note that you are pre-ordering these items? (never used paypal) Also my plan is for two(2) SA-8 V.2 's under the seat of my silverado since i only have 9 inches of height and just over 1 cuft ported down there with a fiberglass box (could do a 10 if fired into the seat), would the 1500 be too much for them or would they eat it with proper tuning? (going to use the 3sixty.3 for processing when it ships) If the subs can take this or you convince me that the 10 would work better then you will def be hearing from me shortly. Quote Link to comment Share on other sites More sharing options...
sundownz Posted June 19, 2012 Author Report Share Posted June 19, 2012 How long ago did the production of the 100.4 stop? Can't seem to find it anywhere I believe we sold out in January. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
sundownz Posted June 19, 2012 Author Report Share Posted June 19, 2012 Ive been planning it pick up a 100.4 and a 1200 but this seems liek the way to go with this pre-order. How would one go about pre-ordering? I guess going direct would be the easiest way but do you just state in a note that you are pre-ordering these items? (never used paypal) Also my plan is for two(2) SA-8 V.2 's under the seat of my silverado since i only have 9 inches of height and just over 1 cuft ported down there with a fiberglass box (could do a 10 if fired into the seat), would the 1500 be too much for them or would they eat it with proper tuning? (going to use the 3sixty.3 for processing when it ships) If the subs can take this or you convince me that the 10 would work better then you will def be hearing from me shortly. Yes you would state in the note what you are ordering. Two SA-8 v.2 will work better than an SA-10 -- especially with a 1500D for power. You will have a hard time accidentally damaging two SA-8 v.2 on that power. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
dcofer Posted June 20, 2012 Report Share Posted June 20, 2012 (edited) Ive been planning it pick up a 100.4 and a 1200 but this seems liek the way to go with this pre-order. How would one go about pre-ordering? I guess going direct would be the easiest way but do you just state in a note that you are pre-ordering these items? (never used paypal) Also my plan is for two(2) SA-8 V.2 's under the seat of my silverado since i only have 9 inches of height and just over 1 cuft ported down there with a fiberglass box (could do a 10 if fired into the seat), would the 1500 be too much for them or would they eat it with proper tuning? (going to use the 3sixty.3 for processing when it ships) If the subs can take this or you convince me that the 10 would work better then you will def be hearing from me shortly. Yes you would state in the note what you are ordering. Two SA-8 v.2 will work better than an SA-10 -- especially with a 1500D for power. You will have a hard time accidentally damaging two SA-8 v.2 on that power. Gooood Gooood, the response I was looking for. Pre-order is goin in shortly has been submitted. Now its gonna be hard to be patient, but well worth it. Gotta wait for that 3sixty.3 anyways >.> and need to get a quote for a pair of those beastly SA-8V.2s Edited June 20, 2012 by dcofer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.