hertz2beloud Posted May 19, 2012 Report Share Posted May 19, 2012 (edited) Does this box look up to par for 2 level 3 12's on 2 t1000's? tuned to 35 hz port area is 14 in per cube or 43.5 total and it nets 3 cubes Edited May 19, 2012 by hertz2beloud Quote Link to comment Share on other sites More sharing options...
CJ18 Posted May 19, 2012 Report Share Posted May 19, 2012 That will be just fine. Quote Link to comment Share on other sites More sharing options...
Kranny Posted May 19, 2012 Report Share Posted May 19, 2012 hard to tell if the port width after it bends goes to 1.5" Quote Link to comment Share on other sites More sharing options...
hertz2beloud Posted June 29, 2012 Author Report Share Posted June 29, 2012 So after getting this box built and everything adjusted I have noticed one sub moving more then the other. I have checked the output voltage of each amp and it is within 1 volt. I checked polarity of the sub that seems not too move as much and its correctly wired. I even switched amps on the subs to make sure it was not an amp issue. After pulling my hair out I took it to a shop today and they seem to think since the port has no divider that is the problem. If anyone has any tips or experience with something like this I am all ears Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.