boostin302 Posted June 15, 2012 Author Report Share Posted June 15, 2012 here is the port porting through rear deck Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
boostin302 Posted June 15, 2012 Author Report Share Posted June 15, 2012 the cut pieace of metal from rear deck Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
boostin302 Posted June 17, 2012 Author Report Share Posted June 17, 2012 Looks like I get the car back Tuesday from the shop that's building my box. Ill have some pics of there after install when I get it back. Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
boostin302 Posted May 11, 2013 Author Report Share Posted May 11, 2013 well this is long over due for a update. just been busy with college , wife and kiddo. that and bumpin the shit of my system. so here is some more pics. it is done minus mids and highs which will come this coming winter! here is the box after being built and resined. 1/0 being ran. second battery is behind the passenger seat. Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
boostin302 Posted May 11, 2013 Author Report Share Posted May 11, 2013 1/0 under the car, zip tied up out of the way. 2 runs of pos and neg from front battery to second battery final run of 1/0 under the hood and ready to be trimmed all 1/0 is soldered. over 30 1/0 soldering connections made checking for voltage lose. test fit on the second battery. i used expandable foam to hold the battery still in the battery box since it liked to slide around Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
boostin302 Posted May 11, 2013 Author Report Share Posted May 11, 2013 i made my own buss bar. 1/8 steel plate. edges grinded down so they dont cut the wire jacket. these will be replaced this coming winter with alum buss bars made a fuse bracket that bolts to the power steering fluid resivor. painted it yellow to match the car. holds the 2 fuse holders for the 2 pos runs from front batt to second batt. and the 3rd one is for the alt. here is the amps. i have one on a rack i made on the side and the other amp is mounted on the sub box with rubber isolaters checking the Ohm load of the subs with some scrap wire Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
boostin302 Posted May 11, 2013 Author Report Share Posted May 11, 2013 if your wondering about the subs, they are 12 inch treo SSX subs. grossly under rated at 2000 watts RMS. ran the port through the rear deck. port measures out at 7 1/2 x 7 1/2 (outside specs) i made a cover to go under the rear deck lid cause i didnt like how it looked. i also resin'd the underside of the deck lid cover so it wasnt such a pieace of shit.. i'll be making a new custom one soon out of plywood. the cover also helps seal off the trunk. under the cover is alot of expandable foam here it is all done before i sealed off the trunk. Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
boostin302 Posted May 11, 2013 Author Report Share Posted May 11, 2013 (edited) here is the boxed sealed off from the trunk.. i have some cleaning up to do and i'll be replacing the bottem carpet since i got some foam on it. i made a cardboard backing to fit in and foamed over it. the applyed fiberglass resin over the foam to seal it off. Edited May 11, 2013 by boostin302 Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
boostin302 Posted May 11, 2013 Author Report Share Posted May 11, 2013 everything up under the hood in place where it should be. for now i am running a stock alt with the 2 optima yellow tops. at idle i have voltage drops but driving around, its nowhere bad. i usually stay at 13.6 volts. i give all demos at 2k RPM and just enjoy my system. Quote My build log http://www.stevemeadedesigns.com/board/topic/143943-2001-mustang-gt-system-rebuild-box-build-pics-updated-61512/ 2001 Ford Mustang GT 4.6 SOHC 380HP 270 amp Mechman alt 2 12" Treo SSX custom built. 6.47 cu ft, tuned to 32Hz 2 hifonics Brutus 2400.1, strapped 1 optima yellow top 1 Kinetic HC1800 14.4v @ 29Hz, 2k RPM over 100ft 1/0 XS flex wire Big 3 in 1/0 100sq ft fatmat deadener 145.3 on music, 142.6 sealed on music Stop being a pussy and wall it off. I hate when my google breaks too I think the usps must be ran by a bunch of drunk ass oriental midget monkey's on methamphetamines. Link to comment Share on other sites More sharing options...
IH8PunkRok Posted May 11, 2013 Report Share Posted May 11, 2013 I cannot lie I miss my mustang Your system looks pretty awesome so far Quote -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.