herbykw Posted June 18, 2012 Author Report Posted June 18, 2012 dipyourcar.com has a video on youtube where they go over plasti-dipped rims and a grill, that had been done about I believe 8 months and 2 weeks and both held up fine. Thats good to hear. I wouldnt try to power spray them, unless you have another can for some touch ups. 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834
98GCLimited Posted June 18, 2012 Report Posted June 18, 2012 Looks alot better with the black rims. Good job
RMac18 Posted June 18, 2012 Report Posted June 18, 2012 dipyourcar.com has a video on youtube where they go over plasti-dipped rims and a grill, that had been done about I believe 8 months and 2 weeks and both held up fine. Thats good to hear. I wouldnt try to power spray them, unless you have another can for some touch ups. Here's the video using the pressure washer with no issue's. There's others as well but this is the most informative one I've seen. I agree that I think I would want an extra can just in case as well though.
Socky Posted June 18, 2012 Report Posted June 18, 2012 where can you get that, my buddy is gonna do his side panels with it on his grand cherokee. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
RMac18 Posted June 18, 2012 Report Posted June 18, 2012 http://www.plastidip.com/diy_where_to_buy.php NAPA, Home Depot, Ace Hardware, Lowes, ect.
herbykw Posted June 18, 2012 Author Report Posted June 18, 2012 Yea it was $5.98 a can at Home Depot. Took two cans for all 4 wheels. 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834
boogie0410 Posted June 20, 2012 Report Posted June 20, 2012 I DID ONE OF MY RIMS WITH A SPRAY CAN BED LINER BUT I TOOK IT OFF
k3n12ock Posted June 20, 2012 Report Posted June 20, 2012 Did mines too. Came out pretty good. I'm gonna buy the metalizers and spray them over with gold. Before: After: Yea it was $5.98 a can at Home Depot. Took two cans for all 4 wheels. Wow only 2? Sure that's enough coats? I went through almost 4 cans on my rims. 05 xB - (2) EVIL 18s - (2) BC3500s - NO WALL Channel 1: http://www.youtube.com/k3n12ock Channel 2: http://www.youtube.com/MrK3n12ock2
98GCLimited Posted June 20, 2012 Report Posted June 20, 2012 Rims look alot better. Not really a fan of the stickerbombed front lip but everyones got their own personal taste and if you like it thats what matters. Good job kenny
Recommended Posts
Archived
This topic is now archived and is closed to further replies.