Tim Lam Posted June 20, 2012 Author Report Posted June 20, 2012 true, i think it would be more simple to just widen out my existing port. Would it work if i made the 6" aeroport with bends not with an L shape, but a T shape? how would i calculate the length of the port that way? Quote
Tarball Posted June 20, 2012 Report Posted June 20, 2012 T would get complicated. If its a tru basic T then you would get cancelation . the T part would need to be 1/2 the area of the rest of the 6" port. Stick with either an L or a few 45deg elbows well place . It will be simpler. Quote CURRENT SYSTEM: Alternator: Stock alt on mids/highs Isolated DC Power 270 SP - Charging @ 16.8v Batteries: (2) XS D1400s Power Cable: Double Runs of 1/0 KNU Kolossus Fleks Headunit: 80-PRS Sub Amp: DC 5.0k Subwoofers: 2 RE MT 15s /PSI dual .7ohm recones Subwoofer Enclosure: 9.1cubes @ 32hz - brutal. Mids & Highs Amp: CT125.4 Active Components: Mids RE XXX 6.5c Highs - 3 RE XXX tweeters per side(A pillar) Noise Control: Damplifier Pro all over the cab. Build Log If you do business with me please leave feedback here: FEEDBACK THREAD Highest Legal Score: 151.0 db Highest Musical 30 Second Average: 151.6 db
Tim Lam Posted June 21, 2012 Author Report Posted June 21, 2012 T would get complicated. If its a tru basic T then you would get cancelation . the T part would need to be 1/2 the area of the rest of the 6" port. Stick with either an L or a few 45deg elbows well place . It will be simpler. cancellation does make sense. it would just be a bit difficult because my port is dead center so idk if i should L line it to the left or right and not completely sure a 6" tube would fit behind the subs in the box. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.