Jump to content
Second Skin Audio

4TH ORDER


Recommended Posts

Personally, Im wanting to get an SA8v2. I want to try it sealed, ported, different sizes and tunings, and 4th order, different volumes and tunings. Why 4th order....never tried it, always been curious about them, so i wanna try one, just cuz i wanna experiment with something new.

Edited by siucsaluki11

woman..cant live with em...cant shoot em...guess were all fucked

You might be a Redneck if you use your leftover gutters for a speaker box port...

YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money.

Link to comment
Share on other sites

y not 6th order?

REALLY narrow bandwidth and a bitch and a half to design....

sealed, widest bandwidth, then ported, then 4th order, then 6th (generally speaking, and if im remembering this correctly) by bandwidth i mean from low F3 to high F3

Edited by siucsaluki11

woman..cant live with em...cant shoot em...guess were all fucked

You might be a Redneck if you use your leftover gutters for a speaker box port...

YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money.

Link to comment
Share on other sites

Why not just go with a properly built ported box for 2....

BTW a 4th is not "something different" anymore....its the new fad to make yo system wang n dem bitches wet.

For me it would be something different. I done the sealed and ported now time to learn something else and increase my knowledge. But most likely I will be doing a ported box subs up and port back and the top where the subs will be mounted will be fiberglass. just have to get some other home projects that popped up fixed and finished. gotta love a leaky pipe in the wall.

PPI dbl din
DC Level 3
1.77cubes net tuned to 33htz.
DC audio 2.0k
CT Pro Audio 8" in front, 6.5 in rear






dc_audio.jpg

Link to comment
Share on other sites

ive always liked 4th orders, before it became the new fad, they have really good bandwidth when designed right. With that much room you should just do a kerf ported box.

Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell

Kenwood H/U

1/0 wire,

136 amp alt 200 ah batteries 12.7 daily

2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts

Mb quart 125.4 wired to 4 aura 6's

3.6 cube box tuned to 36 plays down to 23hz

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1905 Guests (See full list)

×
×
  • Create New...