Jump to content

Recommended Posts

i am absolutely tuned in, i myself have a 2000 mustang and am trying to figure out how in the hell you could put 4 12's in a trunk....i could barely fit my 2 :o

It they were actually P210's. I had 6 of them firing up in a sealed box, it wasn't loud enough so I built a new box for 4 of them in a blowthrough. It was pretty damn loud for 4 P210's in my opinion. I put the box in a grand prix and it fit perfectly. Let me know if you ever want the design. I'm sure I could get it for you.

Saying that that design would be perfect for my grand prix.

You still got the design by chance?

What year is it? My old box went into a 2001 grand prix. It had to slide in from the front of the car and I forgot if we had to cut open the frame bigger. We might have. But once it was in the port matched up perfectly with the center fold down compartment.

It's a 98 so same bodystyle as a 01.

1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud

Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad)

Link to comment
Share on other sites

Sorry for the lack of updates. Here's a new hair trick vid to keep you guys entertained until I get back to work on the car :)

http://youtu.be/7MHjN3zd-IM

Build In Progress!

2000 V6 Mustang

H/U - JVC KW-ADV64BT

8 - P3D212's / 14cu. ft. / 34hz

Front - T1675x2, PPS4-8x4, T1TSx4

Rear - T1675x2, T165x2

Sub Amps - T2500-1bdCPx2

Mids/Highs Amps - T600-4x2

3SIXTY.3 Signal Processor

51Ft. RF 1/0 Spool x 2

Excessive Amperage 300amp Alternator

VMAX CT2500 x 2

Optima Yellowtop

Link to comment
Share on other sites

You said you go to MSU, Michigan state or Montana state?

Michigan State

Build In Progress!

2000 V6 Mustang

H/U - JVC KW-ADV64BT

8 - P3D212's / 14cu. ft. / 34hz

Front - T1675x2, PPS4-8x4, T1TSx4

Rear - T1675x2, T165x2

Sub Amps - T2500-1bdCPx2

Mids/Highs Amps - T600-4x2

3SIXTY.3 Signal Processor

51Ft. RF 1/0 Spool x 2

Excessive Amperage 300amp Alternator

VMAX CT2500 x 2

Optima Yellowtop

Link to comment
Share on other sites

  • 3 weeks later...

So I'm over the whole vinyl wall thing already. I don't like the way it looks. I want to paint the wall. I was thinking fleck stone or bed liner. Any opinions anyone?

Build In Progress!

2000 V6 Mustang

H/U - JVC KW-ADV64BT

8 - P3D212's / 14cu. ft. / 34hz

Front - T1675x2, PPS4-8x4, T1TSx4

Rear - T1675x2, T165x2

Sub Amps - T2500-1bdCPx2

Mids/Highs Amps - T600-4x2

3SIXTY.3 Signal Processor

51Ft. RF 1/0 Spool x 2

Excessive Amperage 300amp Alternator

VMAX CT2500 x 2

Optima Yellowtop

Link to comment
Share on other sites

some pretty dang good quality work! love it! and i'd say fleck stone, but that's just my opinion.

I think you have a bit of truck stuck in your mud bro

~Ford Ranger, ext cab
Kenwood DDX470
1/0ga stinger wiring for big 3
1/0ga ofc flextech wiring

3 kinetik 800's

AQ2200 @1ohm

Sundown Audio X15

in a 27Hz tuned ported box

LE BUILD LOG!!!

Link to comment
Share on other sites

So I'm over the whole vinyl wall thing already. I don't like the way it looks. I want to paint the wall. I was thinking fleck stone or bed liner. Any opinions anyone?

If you use bedliner, I wouldn't use the roll on kind, it doesn't always look the best. I would use spray-on bed liner, actually I just did on my doors, and they came out pretty nice.

Or, a nice slick paint job, IMO, looks dope as hell too!


Kickin' Cruiser

Seller Feedback


Stage 3
Dash, Door Panels,
4th Order wall 4 - 15's
on a DC 5.0K 2 DC 5.0K's


Solo X 15 (v.2) Sub Build

Link to comment
Share on other sites

Just an update vid to keep you guys posted.

http://youtu.be/i3hnU8BTMT8

Build In Progress!

2000 V6 Mustang

H/U - JVC KW-ADV64BT

8 - P3D212's / 14cu. ft. / 34hz

Front - T1675x2, PPS4-8x4, T1TSx4

Rear - T1675x2, T165x2

Sub Amps - T2500-1bdCPx2

Mids/Highs Amps - T600-4x2

3SIXTY.3 Signal Processor

51Ft. RF 1/0 Spool x 2

Excessive Amperage 300amp Alternator

VMAX CT2500 x 2

Optima Yellowtop

Link to comment
Share on other sites

Was working on the system the other day at work. My coworker (97SSBlazer) was inside and decided to get a video of the building shaking. I thought it was pretty crazy.

http://youtu.be/iUcQc7F2mL8

Build In Progress!

2000 V6 Mustang

H/U - JVC KW-ADV64BT

8 - P3D212's / 14cu. ft. / 34hz

Front - T1675x2, PPS4-8x4, T1TSx4

Rear - T1675x2, T165x2

Sub Amps - T2500-1bdCPx2

Mids/Highs Amps - T600-4x2

3SIXTY.3 Signal Processor

51Ft. RF 1/0 Spool x 2

Excessive Amperage 300amp Alternator

VMAX CT2500 x 2

Optima Yellowtop

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1206 Guests (See full list)

×
×
  • Create New...