audison bass knob

[mttornquist]

I know a lot of you guys aren't big fans of bass knobs and all but bear with me.

I recently aquired an audison lrx300.4. I don't have any audison dealers around me and the only remote bass knobs for these amps I can find inkiness are more than I would like to spend. The conections for the bass knob onto the amp are just two little quick connections and I already have connectors that fit onto them so that isn't a problem.

Onto the real question. I found someone on another forum who measured the resistance of his bass knob for this amp and at minimum it was at 6 ohms and at Max it was at 51k ohms. So in theory if I get a pot that goes from 6 ohms to 51k ohms it should work at a remote bass knob correct?

[LZTYBRN]

I know a lot of you guys aren't big fans of bass knobs and all but bear with me.

wut.

And I guess that would technically work, but it'd be much simpler to get a PAC LC-1 or similar.

[Robert8252]

I use the audison knob. Honestly the only other thing I would run besides it is a lc-1