808BommerN702 Posted July 15, 2012 Report Posted July 15, 2012 ok, i got a smd cc-1, adjusted my low pass on my alpine mrx-m110. there's a subsonic filter too. did the instructions and for some reason it's telling me to adjust the sub filter down when it's @ it's lowest??? I need help!! is my cc-1 broken? or my sub filter? wtf!! eq's and all are turned off and all. please help!!! Quote
Guest Posted July 15, 2012 Report Posted July 15, 2012 it tells you to put the subsonic all the way down so that its not affecting you trying to tune the low pass filter. you can readjust the subsonic once you're done with the LPF Quote
808BommerN702 Posted July 15, 2012 Author Report Posted July 15, 2012 that's just it. I adjusted the lpf doing just that. then i turned off the cc-1 then tried to to cali it to 25Hz, and the cc-1 was telling me the to turn it down. after i adjusted th lpf. Quote
Jessica Posted July 15, 2012 Report Posted July 15, 2012 Well, what freq are you trying to set you LPF at and what is the lowest freq on your amp's lpf? Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
808BommerN702 Posted July 15, 2012 Author Report Posted July 15, 2012 let me rephrase my problem. Ok, first i turn my subsonic filter all the way down & my LPF all the way up. Then, I i go to my desired track which is track 16 (80Hz). i successfully calibrate my LPF. Then i turn off the cc1, turn my volume to 0. then as my sub filter still turned down all the way i then go to track 6 (25Hz) i then turn on the cc1, and slowly bring the volume up. i get a signal. then i hit read, and the cc1 is telling me to turn it down!!!! So am I doing something wrong? please help!! thanks! Quote
808BommerN702 Posted July 15, 2012 Author Report Posted July 15, 2012 lowest freq on the LPF is 50Hz. the highest on the subsonic is 30Hz. idk what's going on. Quote
808BommerN702 Posted July 15, 2012 Author Report Posted July 15, 2012 i set my LPF to 80Hz successfully. so after that's set i can't adjust the sub fil. to 25Hz. Quote
SnowDrifter Posted July 15, 2012 Report Posted July 15, 2012 Reverse what it says to do for the subsonic. When it says turn it down, turn it up and vice-versa let me know if that helps. Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Jessica Posted July 15, 2012 Report Posted July 15, 2012 (edited) Alright, Dumb Question, did you hold off for 1 second before you tried to set the infrasonic? and when it tells you to turn it down have you tried to just go ahead and turn it up to see if it gives you a calibration light? edit Ninja^^ Edited July 15, 2012 by strangeduck Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
808BommerN702 Posted July 15, 2012 Author Report Posted July 15, 2012 yup, tried both. still doesn't work. held down the off for 5 seconds. and turned it up while i turned it down. still fail. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.