any one good at making boxes? need help!

[locomanny569]

whats up hey i need help tuning this box cant make it nay bigger then the size it is on im puting 2 12 inch DC level 3 in that. i wanna tune it to 35HZ but cant same to find the way to do it or i cant use the program i also dont know how would i put the angle for the port dont know if i explain that good any idea or help?

[AgentTyler]

You need to make the port width smaller and the length longer and height atleast 1.5 inches smaller. I'd help you out but im not at a computer.

There is a guide on here that someone created that goes step by step on how to use torres.

Edited July 26, 2012 by AgentTyler

[Ddub847]

you need to put the length longer for the port

[locomanny569]

well the size i measured in my trunk was 19x15x35 so i toke 1.5 from each is that right?

[locomanny569]

using 2 common walls BTW

[OrionStang]

You're all fucked up LOL. Try this

[locomanny569]

You're all fucked up LOL. Try this

omg thanks and i know i am ok so i dont have to subtract the 1.5 it does it for me???? and i was gonna go for 35HZ but i have been told i should go 32?

[stroupe79]

the subs are .16 displacement each...so .32 together...also they recommend 1.5cubes per sub...now with the dimensions you posted its gonna be tough to get 3cubes tuned down to 35hz with .32 when your gross volume started at 3.25cubes

[stroupe79]

You're all fucked up LOL. Try this

if you can fit these dimensions I would do this....the dimensions in your first attempt wouldn't work correctly

[locomanny569]

You're all fucked up LOL. Try this

if you can fit these dimensions I would do this....the dimensions in your first attempt wouldn't work correctly

hey thanks i need all the help i can get because i wanna get this done ASAP