02 Civic Ground Pounder Rebuild

[sweet&low]

Been working on this for a while but finally getting some build pictures up. Doing full rebuild on the Civic.

Equipment

OLD

4- DD 2512 Dual 4

1- DD M2a

1- DD C2b

1- DD C3b

2- DD 6.5 Component Sets

1- DD 5.25 Component Set

3- Kinetik HC-2400

NEW

4- DD 2512 Dual 4

1- DD M2a

1- DD C2b

1- DD C3b

10- Selenium 8w4p

6- Power Acoustik NX-5

5- Shuriken BT-60

Old Setup (153 at 54hz, 149 at 29hz)

[IBleedMusick]

I saw this on FloridaSPL looks pretty good tuned in

[sweet&low]

http://www.youtube.com/watch?v=luzGpzAVhA8

Everything out and building the sub floor





New Anzo Headlights and 6k HIDs (There on the car but haven't taken a pic yet)

[sweet&low]

http://www.youtube.com/watch?v=BoTuIWKwq4w&feature=relmfu

Running New Raptor 1/0 and redoing big 3. Install Shuriken Bt-60 in front.

Wood For Enclosure

Edited July 27, 2012 by sweet&low

[sweet&low]

Building the enclosure

[sweet&low]

Run Wire and Installed 3 of the Shuriken Bt-60

Subs In

It is Playing but is not sealed off yet. Have TL it though and so far it is doing 148 at 27hz and 146 at 52hz.

http://www.youtube.com/watch?v=km3hzdLlUBk

[sweet&low]

http://www.youtube.com/watch?v=3IwH059qaAY

[sweet&low]

Finally have some updates been a while but had a lot problems with the roof from the years of abuse. Also decided to wall it off again.

Built a top piece to make the wall which holds. 8 Selenium 8w4p and 4 Power acoustic NX-5s.

[sweet&low]

Then it went into the body shop for about 2 weeks. Window was leaking and all the spot welds on the front of the car were broken. So I had it braced and fixed. It has a piece of 1"x1"x1/8" angle iron running the length of the roof and then that was boxed in with 3 layers of 1/8" Plate steel. The window lip is about a 1/4" thick and all welds are solid or plug welded. They also rewelded the second brace back on.

[sweet&low]

started assembling the top half sealed it off and blocked out the back window. Then filled it with r13 Home insulation to make the enclosure to the Selenium 8s. Then suede wrapped everything.

http://www.youtube.com/watch?v=-31AiiDnpNg