OrzechNJ Posted August 1, 2012 Author Report Share Posted August 1, 2012 (edited) ok so heres the max dimensions that I can work with.. what u guys think ? Edited August 1, 2012 by OrzechNewJersey Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 1, 2012 Author Report Share Posted August 1, 2012 (edited) i know it looks small but idk the other way .. Edited August 1, 2012 by OrzechNewJersey Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Joe X Posted August 1, 2012 Report Share Posted August 1, 2012 If your max dims are 16 x 34 x 23 then about 4 cubes is you can have. (would need to declare the subs displacement of 0.32 cubes). Quote Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 1, 2012 Author Report Share Posted August 1, 2012 If your max dims are 16 x 34 x 23 then about 4 cubes is you can have. (would need to declare the subs displacement of 0.32 cubes). torres says 5.86 - 2x 0.16disp so i got around 5.5cuft Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 1, 2012 Author Report Share Posted August 1, 2012 I just checked and they recommend 2.5 cuft for single fi q 12.. so maybe I shouldnt go over 5? Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Joe X Posted August 1, 2012 Report Share Posted August 1, 2012 If your max dims are 16 x 34 x 23 then about 4 cubes is you can have. (would need to declare the subs displacement of 0.32 cubes). torres says 5.86 - 2x 0.16disp so i got around 5.5cuft You are looking at the gross volume, look below to find the net volume, that is the one that specs the box it reads above 4 cubes but when you enter the driver displacement you will get about 4 cubes. Quote Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 1, 2012 Author Report Share Posted August 1, 2012 If your max dims are 16 x 34 x 23 then about 4 cubes is you can have. (would need to declare the subs displacement of 0.32 cubes). torres says 5.86 - 2x 0.16disp so i got around 5.5cuft You are looking at the gross volume, look below to find the net volume, that is the one that specs the box it reads above 4 cubes but when you enter the driver displacement you will get about 4 cubes. oh yea.. I see now.. I will stick to this than ! and I still gotta think off how to cut all the stuff since torres doesnt include the port pieces with my port size.. Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Joe X Posted August 1, 2012 Report Share Posted August 1, 2012 If your max dims are 16 x 34 x 23 then about 4 cubes is you can have. (would need to declare the subs displacement of 0.32 cubes). torres says 5.86 - 2x 0.16disp so i got around 5.5cuft You are looking at the gross volume, look below to find the net volume, that is the one that specs the box it reads above 4 cubes but when you enter the driver displacement you will get about 4 cubes. oh yea.. I see now.. I will stick to this than ! and I still gotta think off how to cut all the stuff since torres doesnt include the port pieces with my port size.. I will update the above suggestion to fit 23 deep instead of 23.5". Just a minute. Quote Link to comment Share on other sites More sharing options...
Joe X Posted August 1, 2012 Report Share Posted August 1, 2012 Ok here is one like the above but 23 deep which is your max, managed near 30Hz and good port area: Enclosure Specifications: Fb = 30.25 Hz Vb = 4 ft^3 External Height = 16 in External Width = 34 in External Depth = 23 in Port Width = 4 1/8 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Front & Back (3 parts) = 34 x 16 Left & Right Sides = 20 3/4 x 14 1/2 Top & Bottom = 34 x 20 3/4 L Port Internal Assembly Parts: Front to Back = 16 5/8 x 14 1/2 Extension = 13 x 14 1/2 Quote Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 1, 2012 Author Report Share Posted August 1, 2012 the total net volume includes the 45 corners ? Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.