Joe X Posted August 1, 2012 Report Share Posted August 1, 2012 the total net volume includes the 45 corners ? The two corners in compression chamber airspace are 0.026 cubic feet, and are rounded off since have no effect on performance. Quote Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 2, 2012 Author Report Share Posted August 2, 2012 ok I will go for it .. thanks a lot for help !!! the only problem which I have is that I dont really have a good place to make all cuts etc so I will just go to home depot and they will cut it for me .. I might have some problems with cutting the port in the front pieces and the circles but I will go for it anyways ... any advises or anythin I should be careful about ? Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 2, 2012 Author Report Share Posted August 2, 2012 big thanks to Joe X for the box design !!!!! Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 2, 2012 Author Report Share Posted August 2, 2012 One mote question, whats the size of 45s? Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Joe X Posted August 2, 2012 Report Share Posted August 2, 2012 One mote question, whats the size of 45s? 2 1/2" wide. Quote Link to comment Share on other sites More sharing options...
Joe X Posted August 2, 2012 Report Share Posted August 2, 2012 (edited) The one in the port turn depends on if you slant the inner corner (as shown) or not, that 45 has to be made in a way that the port width is preserved (4 1/8") at the turn. Let me know any other questions. Edited August 2, 2012 by Joe X Quote Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 2, 2012 Author Report Share Posted August 2, 2012 (edited) Front to Back = 16 5/8 x 14 1/2 Extension = 13 x 14 1/2 length of the port include the 45 corners ? or I need to add 3/4" for the 45? edit; 16 5/8 with the 45 or 16 5/8 + 3/4 = 17 3/8 ? Edited August 3, 2012 by OrzechNewJersey Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Joe X Posted August 3, 2012 Report Share Posted August 3, 2012 Front to Back = 16 5/8 x 14 1/2 Extension = 13 x 14 1/2 length of the port include the 45 corners ? or I need to add 3/4" for the 45? edit; 16 5/8 with the 45 or 16 5/8 + 3/4 = 17 3/8 ? No, the length of the port parts are final and the 45s do not alter tuning in any significant way. The one in the port turn MUST be made in a way that the port width stays the same, take a look: If the port narrows at the turn then the whole box performance can be compromised. If you can't do those cuts right is better not to do any 45s at all. Quote Link to comment Share on other sites More sharing options...
OrzechNJ Posted August 3, 2012 Author Report Share Posted August 3, 2012 I just wanna make sure, before I start doin anythin.. It doesnt look so complicated .. (i think) and yea i know that the port has to have 4 1/8 everywhere .. Quote sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.