TylerParrish Posted August 21, 2012 Report Posted August 21, 2012 i just gotta ask....did u check to see if the fuse was blown? Quote What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
Bakerman Posted August 21, 2012 Report Posted August 21, 2012 ohhhhh so i can run a wire off the yellow wire to that battery and then ill be good right? "run a wire OFF the yellow wire"? The only thing the yellow wire should be going to is a constant power source...nothing else. Quote
Jessica Posted August 21, 2012 Report Posted August 21, 2012 My car has the same issue, It's old and there is no factory plug in the dash. The fuse is good but the switch wont turn on the headunit. I ran a new wire to the battery positive from the yellow wire, and ran a wire from the red wire to a fuse that did shut off when the ignition was off. Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
NT_Hardcore Posted August 21, 2012 Report Posted August 21, 2012 u have to have 3 wires hooked up for this to work. red yellow and black. blk is ground. yellow is constant power (like off the batt) red is switched power (turns on with ign) you can wire the red to a switched source or use a switch and u will retain all memory settings- Quote
CXHBumpin39 Posted August 21, 2012 Author Report Posted August 21, 2012 bakermanINC, i was saying since the yellow wire isn't long enough just connect more wire on it and run it to the positive terminal on the battery Quote
TylerParrish Posted August 21, 2012 Report Posted August 21, 2012 i just gotta ask....did u check to see if the fuse was blown? Quote What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
CXHBumpin39 Posted August 21, 2012 Author Report Posted August 21, 2012 yea i did, after i ran a wire to the ignition, and it was blown so i changed it and just took out the wire that i ran to the ignition Quote
Bakerman Posted August 21, 2012 Report Posted August 21, 2012 bakermanINC, i was saying since the yellow wire isn't long enough just connect more wire on it and run it to the positive terminal on the battery yes...that will work. I thought you meant it was already connected to something, and that you were going to splice into it. That could end up bad. Quote
TylerParrish Posted August 21, 2012 Report Posted August 21, 2012 hmmm, don't really know what to say then Quote What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
CXHBumpin39 Posted August 21, 2012 Author Report Posted August 21, 2012 yea ill just run a wire to the battery and it should work, just gotta drill a hole through the firewall and im good to go Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.