Beanz Posted August 24, 2012 Report Share Posted August 24, 2012 Anyone with a grand prix pref around 97-2001 have you seen anyone or done it yourself to be able to fit a double din in the dash? That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
ZachG Posted August 26, 2012 Report Share Posted August 26, 2012 I haven't tryed yet I will in a few weeks, but a 6-7" should fit it looks like 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad) Link to comment Share on other sites More sharing options...
mrdavebasshead75 Posted August 30, 2012 Report Share Posted August 30, 2012 Its gonna take some balls and alot of imagination. I had a 2003 and there is NO room unless u cut the hell out of the opening. Its only a din and a half. It can be done though, you just have to do ALOT of cutting and maybe some fiberglass work. http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.