TylerParrish Posted September 2, 2012 Report Share Posted September 2, 2012 I figured this would be the easiest and fastest way to get a response, but how much damplifier (or damplifier pro) wuld i need for a trunk and 2 doors? (car is a 2000 mustang) Quote What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter Link to comment Share on other sites More sharing options...
OrionStang Posted September 2, 2012 Report Share Posted September 2, 2012 Doors are huge. Id say 40sq ft to be safe. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Crandis16 Posted September 2, 2012 Report Share Posted September 2, 2012 (edited) I would say 20 max for 1 layer Edit: don't own mustang, just basing off my car entire trunk not just trunk lid? Edited September 2, 2012 by Crandis16 Quote My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
TylerParrish Posted September 2, 2012 Author Report Share Posted September 2, 2012 I was must gonna do trunk lid and right behind the license plate....would I need 20 sq ft for entire trunk and doors or just the lid and doors? Quote What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted September 2, 2012 Report Share Posted September 2, 2012 Just take a tape measure and take rough measurements on the outside of your trunk and doors... probably more reliable than taking a bunch of guesses. Quote Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
OrionStang Posted September 2, 2012 Report Share Posted September 2, 2012 I used 18sq ft on my doors alone. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
TylerParrish Posted September 2, 2012 Author Report Share Posted September 2, 2012 I used 18sq ft on my doors alone. Jesusss, I knew they were big, but not that big! Did you do a full coverage of the doors? Quote What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter Link to comment Share on other sites More sharing options...
Nate Futuristic Posted September 2, 2012 Report Share Posted September 2, 2012 i always do a good full layer on the inside of the door and peice up the outside of it i know alpha damp say that you done need to cover the whole thing (25% i think) and if your walling off the trunk i wouldnt worry to much about trunk rattle (get cheap stuff for that) (someone else may be able to chime in about the trunk thing) and im sending you a pm Quote down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups ^^ Cant wait to swalllow Ghost's babies Link to comment Share on other sites More sharing options...
OrionStang Posted September 2, 2012 Report Share Posted September 2, 2012 Yes, and remember, you have the outer skin AND the inner panel. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
TylerParrish Posted September 2, 2012 Author Report Share Posted September 2, 2012 i always do a good full layer on the inside of the door and peice up the outside of it i know alpha damp say that you done need to cover the whole thing (25% i think) and if your walling off the trunk i wouldnt worry to much about trunk rattle (get cheap stuff for that) (someone else may be able to chime in about the trunk thing) and im sending you a pm The wall will be temporary until next sub(s)....but that's a great point. Quote What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.