TylerParrish Posted September 5, 2012 Report Posted September 5, 2012 I was playin around on Torres and I can't seem to find a way to fit an aero port on the box I'm trying to design. If someone gets any spare time and wants to see what they come up with. My dim: 14H x 34W x 36D. I'm trying to get a net volume of 3 cu ft and fit a 6 inch aero on the front of the box. What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
Mlcantin Posted September 5, 2012 Report Posted September 5, 2012 I was playin around on Torres and I can't seem to find a way to fit an aero port on the box I'm trying to design. If someone gets any spare time and wants to see what they come up with. My dim: 14H x 34W x 36D. I'm trying to get a net volume of 3 cu ft and fit a 6 inch aero on the front of the box. I would be glad to help out if i knew what torres is?
TylerParrish Posted September 5, 2012 Author Report Posted September 5, 2012 I was playin around on Torres and I can't seem to find a way to fit an aero port on the box I'm trying to design. If someone gets any spare time and wants to see what they come up with. My dim: 14H x 34W x 36D. I'm trying to get a net volume of 3 cu ft and fit a 6 inch aero on the front of the box. I would be glad to help out if i knew what torres is? sorry to say dude, don't think you have quite the experience yet. But ill give u a lonk to torres, have fun playin around on it designing boxes. I would advise getting to know it well. What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
TylerParrish Posted September 5, 2012 Author Report Posted September 5, 2012 I was playin around on Torres and I can't seem to find a way to fit an aero port on the box I'm trying to design. If someone gets any spare time and wants to see what they come up with. My dim: 14H x 34W x 36D. I'm trying to get a net volume of 3 cu ft and fit a 6 inch aero on the front of the box. I would be glad to help out if i knew what torres is? http://www.stevemeadedesigns.com/board/topic/38791-torres-box-tuning-calculator-updated-818/ there you go What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
Joe X Posted September 5, 2012 Report Posted September 5, 2012 A box like this (used the tuning on your sig and 0.18 cubes for driver displacement): Enclosure Specifications: Fb = 34 Hz Vb = 3 ft^3 External Height = 14 in External Width = 21.5 in External Depth = 26 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: Front & Back = 21 1/2 x 14 Left & Right Sides = 24 1/2 x 12 1/2 Top & Bottom = 21 1/2 x 24 1/2 Port Quantity and Dimensions: Number of Ports = 1 Pipe Port Diameter = 6 Pipe Port Length = 17 1/8
TylerParrish Posted September 5, 2012 Author Report Posted September 5, 2012 A box like this (used the tuning on your sig and 0.18 cubes for driver displacement): Enclosure Specifications: Fb = 34 Hz Vb = 3 ft^3 External Height = 14 in External Width = 21.5 in External Depth = 26 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: Front & Back = 21 1/2 x 14 Left & Right Sides = 24 1/2 x 12 1/2 Top & Bottom = 21 1/2 x 24 1/2 Port Quantity and Dimensions: Number of Ports = 1 Pipe Port Diameter = 6 Pipe Port Length = 17 1/8 was kinda lookin for it to be 34" wide so it's easier to seal off the trunk when i do make it. It may not be possible I guess though, and keeping it within the 3 cu ft range :/ What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
Joe X Posted September 5, 2012 Report Posted September 5, 2012 was kinda lookin for it to be 34" wide so it's easier to seal off the trunk when i do make it. It may not be possible I guess though, and keeping it within the 3 cu ft range :/ It may be possible to exchange some height by width but it would be better if you provided more infos like subs, vehicle etc models.. just to avoid posting something that's not going to work.
TylerParrish Posted September 5, 2012 Author Report Posted September 5, 2012 Alright let me just restate everything. 34L (preferred) x 14H (mandatory) x 36D (useable space). Subs will be 2 Fi BL 10's. Car is 2000 Mustang. It's all in my sig btdubss What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
TylerParrish Posted September 5, 2012 Author Report Posted September 5, 2012 I just wanna find out cause this is my box and i wanna see the ass end of the subs without my port in the way. you can see my problem... What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
Recommended Posts
Archived
This topic is now archived and is closed to further replies.