sundownz Posted October 9, 2012 Report Posted October 9, 2012 (edited) http://www.caraudioc...prototypes.html ** Thread of prototype development As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. DO NOT ORDER if you are not okay with possible delays on the delivery. That being said the ETA is middle of January 2013 on these. ---------- Pre-Order Price : $115 Regular Price : $140 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] YOU MUST INCLUDE YOUR NAME AND ADDRESS. If these are both not included your payment will be refunded. ---------- Suggested Box : 0.25 ft^3 sealed (These will run ported if desired in 0.5 ft^3) Depth : 4.75" Power : 300 RMS Top Plate Height : 25mm Coil Height : 12.5mm/ 8-layer Copper Former : Special low eddy current alloy w/ spiral cut X-Max : 14.5mm by 70% BL in FEA Topology : Under-Hung Re : 6.03 ohms (series) Fs : 45.2 Hz Qes : 0.63 Qms : 7.31 Qts : 0.58 Le : 6.26 mH Sd : 30.68 in^2 Vas : 7.74 L BL : 15.55 NA Mms : 89 g Cms : 138 uM/N Sens 1w/1m : 82.29 dB ---------- * Same spider as the SA-8 v.2 but only one layer (top layer) * Solid pole like the other SD-2 woofers so there is no need to leave room to breathe behind them. * For this design I used drilling in the basket as opposed to the vent ring to save depth. * Left to right : E8 v.2 // SD-2 8 // SA-8 v.2 Edited October 9, 2012 by sundownz 1 - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
BobbyG2 Posted October 10, 2012 Report Posted October 10, 2012 Looking good! I have a friend whos getting a new car where space will be a problem, I'll let him know that these are available. *New vehicle and system coming soon.*
ghettobasshead Posted October 10, 2012 Report Posted October 10, 2012 How much time do we have to pre order? Or do pre orders end when you are sold out?
sundownz Posted October 10, 2012 Author Report Posted October 10, 2012 How much time do we have to pre order? Or do pre orders end when you are sold out? Depends. Usually we run until shortly before arrival -- but we may run out first. - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
A J Cotton Sr Posted October 12, 2012 Report Posted October 12, 2012 ok is it possible for the sd-10's to have the stitch cone If I order recone kit for them and could I get these changed to 8's ?
A J Cotton Sr Posted October 12, 2012 Report Posted October 12, 2012 I just recently brought a SA 8" v2 and I'm very impress with it much better then the DD 1508 that I had get job Sundown. Now just need to get an enclosure built for it that is up to specs
cf2004 Posted October 14, 2012 Report Posted October 14, 2012 i don't suppose you could test these out on a termlab? i am interested in seeing what numbers they can do
sundownz Posted October 15, 2012 Author Report Posted October 15, 2012 ok is it possible for the sd-10's to have the stitch cone If I order recone kit for them and could I get these changed to 8's ? The 8" motor is completely different; so it cannot be changed to other sizes nor vice-versa. - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
ghettobasshead Posted November 6, 2012 Report Posted November 6, 2012 Just ordered my 2 sd 8's from sundownonly.com now i gotta wait till release date jan 18th :/ let the waiting begin
sundownz Posted December 12, 2012 Author Report Posted December 12, 2012 The containers with these should be in the port of Charleston around Dec 20th -- depending on holiday delays to get from there to us they may arrive before end of December so pre-order NOW if you want some at this price - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
Recommended Posts