SMZ2 Posted October 12, 2012 Report Share Posted October 12, 2012 Will a DC level 8 recone work for a tc epic 8? I'm about to purchase one to play around with so I can learn to recone and practice building boxes and it needs a recone and I'm pretty sure tc doesn't have one. Also someone told me the level 2 8's softparts may work. Thank you! Quote My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
Emmet Posted October 12, 2012 Report Share Posted October 12, 2012 Doesn't the epic 8 have a 2" coil and the dc has a 2.5? I might be wrong though... Quote i shook this one kids hand and it just folded in mine. long story short i fucked his girlfriendso.. yeah.. You want this to happen to you? Give decent handshakes people. I was gifted with an innate ability to distribute wholesale ass beatings in a timely and orderly fashion. Link to comment Share on other sites More sharing options...
SMZ2 Posted October 12, 2012 Author Report Share Posted October 12, 2012 someone told me the old model may work... Quote My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
mw02civic Posted October 12, 2012 Report Share Posted October 12, 2012 DC m2 8 has a 2"vc. Quote Link to comment Share on other sites More sharing options...
SMZ2 Posted October 12, 2012 Author Report Share Posted October 12, 2012 (edited) So it may work? Let me try and find some specs on the epic 8 and see if rusty or a DC rep will chime in. I just pm'd the seller on specs of the soft parts. Edited October 12, 2012 by SMZ2 Quote My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
SMZ2 Posted October 12, 2012 Author Report Share Posted October 12, 2012 Specs from seller. gap id is 49.61mm gap od is 58.52 mm OD of slugs is 150mm top plate is 9.4mm high pole is 7.85mm above top plate spider is right around 6 3/16"s-6 1/4" Quote My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
CJ18 Posted October 13, 2012 Report Share Posted October 13, 2012 email [email protected] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.