cpmattin Posted October 15, 2012 Author Report Posted October 15, 2012 Yea I meant to have three, never had that software before and never made a ported box, and the recommended specs are 2.9 cu. What vehicle is this for? 97 s10 ext cab
cpmattin Posted October 15, 2012 Author Report Posted October 15, 2012 I can't seem to stay within my max measurements and keep the tuning at 35 hz and 12-16sq inches per cu. ft
cpmattin Posted October 18, 2012 Author Report Posted October 18, 2012 Anyone wanna help, it seems to me like I'm making it harder than it is, I can't seem to make a box that will stay within my max dimensions and still follow all those guidelines ...
SnowDrifter Posted October 18, 2012 Report Posted October 18, 2012 Post up your maximum dimensions ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
cpmattin Posted October 19, 2012 Author Report Posted October 19, 2012 20 in deep 17 wide 23.5 tall All those are max except the height, it can go a little higher if needed but preferably not
SnowDrifter Posted October 19, 2012 Report Posted October 19, 2012 I'm exactly sure what these subs like in terms of airspace. I don't have much experience with them. But here is what I come up with after a couple second of playing around ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
cpmattin Posted October 19, 2012 Author Report Posted October 19, 2012 how much would it hurt it if the size was smaller than recommended?
KingPepsi Posted October 19, 2012 Report Posted October 19, 2012 How does this look? I think I got everything you were looking for. This signature intentionally left blank.
Guest Posted October 19, 2012 Report Posted October 19, 2012 alpine box size specs mean jack shit most of the time. you should try to keep Port Ratio under 1:8. 1:11 and 1:17 are way too high.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.