armykyle1 Posted October 30, 2012 Report Share Posted October 30, 2012 Well I'll be walling my car soon. I'm rocking struts at all four corners too. Multi-link rear setup. I've already put the best struts on it and 1.5" spring helpers(the kind that go in the coil springs). I'm still sitting pretty low in the back. Custom ufo 18's, D3100, NSB130ft, wood, wires and amps. The wall will be three 18's, two M4a's and 5-7 D3100's. Two on the rear passenger floor boards, three in the spare tire well(kind of centered on the axle line) then possibly one behind each wheel well. My estimate is I'll be adding around another 500lbs or more behind the B-pillar The only things I've come up with is running strut bags(most likely rears only) which I'll need drop springs for the front. Reason I say rears only, is I won't have room for a tank, compressor or switches. So just a manual valve to check the pressure. Going to coilovers(not sure how they will take weight) Trying to find heavier springs for the rear. 2000 Daewoo Nubira http://www.airbagit.com/Air-Suspension-kits-all-4-wheels-p/fbs-dae-20-kit3.htm these don't look like the right ones though lol http://www.airbagit.com/Air-Suspension-kits-Rear-axle-p/fbx-r-dae-20.htm coilovers. There's a few types http://shop.performancewheel.com/infoprodvehicle/ksport-gt-pro-coilover-damper-system/236/849/default.aspx I've thought about getting some junk yard springs for the front and see if they'll fit the rear strut mounts. Kind of how it sits right now TEAM XS POWERTEAM HEAVY HERTZMy build- http://www.stevemeadedesigns.com/board/topic/194454-e46-bmw-build-pos/#entry2914134youtube- http://www.youtube.com/user/armykyle1big build starting Link to comment Share on other sites More sharing options...
armykyle1 Posted October 30, 2012 Author Report Share Posted October 30, 2012 Any help or ideas will be very appreciated. TEAM XS POWERTEAM HEAVY HERTZMy build- http://www.stevemeadedesigns.com/board/topic/194454-e46-bmw-build-pos/#entry2914134youtube- http://www.youtube.com/user/armykyle1big build starting Link to comment Share on other sites More sharing options...
armykyle1 Posted October 30, 2012 Author Report Share Posted October 30, 2012 Come on ladies. TEAM XS POWERTEAM HEAVY HERTZMy build- http://www.stevemeadedesigns.com/board/topic/194454-e46-bmw-build-pos/#entry2914134youtube- http://www.youtube.com/user/armykyle1big build starting Link to comment Share on other sites More sharing options...
MarioB Posted October 30, 2012 Report Share Posted October 30, 2012 When I get off work ill send u a link to a place I found that I may go witg 12- DC Audio m2Lvl3 12's1- Hertz HSK3 way2- DC5K's2- ZX350.42- Stinger SP1500D batteries in rear3- runs of 1/0ga. to the rearTeam DC Audiodcsoundlab.com Quality is all in how you take pictures I have plenty of projects that look WAY better on camera then in person crazy to fit so many in so little. Reminds me of some of the porns I've seen? Link to comment Share on other sites More sharing options...
MarioB Posted October 30, 2012 Report Share Posted October 30, 2012 Coilsprings.com 12- DC Audio m2Lvl3 12's1- Hertz HSK3 way2- DC5K's2- ZX350.42- Stinger SP1500D batteries in rear3- runs of 1/0ga. to the rearTeam DC Audiodcsoundlab.com Quality is all in how you take pictures I have plenty of projects that look WAY better on camera then in person crazy to fit so many in so little. Reminds me of some of the porns I've seen? Link to comment Share on other sites More sharing options...
armykyle1 Posted October 30, 2012 Author Report Share Posted October 30, 2012 Coilsprings.com Got off the phone with them a little bit ago. They said worst case scenario, it'll be 280 for the rear pair. The guy said most likely, low 200s for my springs. Seems pretty reasonable for something that's one off. TEAM XS POWERTEAM HEAVY HERTZMy build- http://www.stevemeadedesigns.com/board/topic/194454-e46-bmw-build-pos/#entry2914134youtube- http://www.youtube.com/user/armykyle1big build starting Link to comment Share on other sites More sharing options...
StreetMetalBen Posted November 2, 2012 Report Share Posted November 2, 2012 If your looking at going air, These are really reliable, and not too hard to install. http://www.rollpans.com/Universal-Air-Front-Strut-Bags-Universal-pair_p_14736.html But i advise NOT using air without any on-board management. its dangerous, plus just a major pain in the @$$ Link to comment Share on other sites More sharing options...
MarioB Posted November 2, 2012 Report Share Posted November 2, 2012 ^ thats for the front 12- DC Audio m2Lvl3 12's1- Hertz HSK3 way2- DC5K's2- ZX350.42- Stinger SP1500D batteries in rear3- runs of 1/0ga. to the rearTeam DC Audiodcsoundlab.com Quality is all in how you take pictures I have plenty of projects that look WAY better on camera then in person crazy to fit so many in so little. Reminds me of some of the porns I've seen? Link to comment Share on other sites More sharing options...
armykyle1 Posted November 6, 2012 Author Report Share Posted November 6, 2012 ^ thats for the front Yea, I don't think I'll need the front anyway. I'll probably going to the coilspring guys TEAM XS POWERTEAM HEAVY HERTZMy build- http://www.stevemeadedesigns.com/board/topic/194454-e46-bmw-build-pos/#entry2914134youtube- http://www.youtube.com/user/armykyle1big build starting Link to comment Share on other sites More sharing options...
MarioB Posted November 29, 2012 Report Share Posted November 29, 2012 did you end up ordering these? 12- DC Audio m2Lvl3 12's1- Hertz HSK3 way2- DC5K's2- ZX350.42- Stinger SP1500D batteries in rear3- runs of 1/0ga. to the rearTeam DC Audiodcsoundlab.com Quality is all in how you take pictures I have plenty of projects that look WAY better on camera then in person crazy to fit so many in so little. Reminds me of some of the porns I've seen? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.