Jump to content

SPS-610C or KFC-P709PS? Tweeter suggestions? Thinking Vifa.


wellington

Recommended Posts

I tried the kenwoods and they sounded the same as the stock mids/highs with equal power going to them.

I like these because they have a mount for the tweeters that fits directly into the stock mount so there is no need for fabrication of a mount.

Anything better I should be considering?

I would be fine with any mids that aren't junk (and better than stock) and silk dome tweeters (prefer warm smooth over tissss tisss)

kenwoods are $70 on sonic, alpin $80

Anyone know about the warranties from sonic?

I don't plan to abuse them but I do like to get loud and even on the lowest gain setting from my sony xm 4045, the stock tweeters started to smoke, lol

http://www.sonicelec...KFC-P709PS.html

http://www.sonicelec...e-SPS-610C.html

I had some vifa tweeters that I did not cross and 2 of them were DOA and the working one died shortly after. Paid a total of $20 for all 3 so it wasn't a big deal. I found them on ebay and they were the last ones, and now I only find ones with a huge mount, that looks like it might be able to be removed.

Most of these vifas frequency range is from 1-1.5k to 20k

I might even consider making some mounts for them in the a-pillars if they anyone thinks it's worth it

http://www.ebay.com/...=item5645a2d4c8

http://www.ebay.com/...=item5645a9203e

http://www.ebay.com/...=item5ae05ca677

http://www.ebay.com/...=item5199dc16a9

Any input is appreciated.

2010 HHR LT - DNX 6160 - sony xec-700 - sony xm-4040 for door mids - XM-6020 for tweets in a-pillar - saz1500d v1 - VVME RD-12 1.75 f^3 32hz

guru and president of the "cheap asses trying to beat up the block with bargain bin woofers" club

Link to comment
Share on other sites

no vs thread's man.. not trying to be a rent a mod

but have you ever heard of soundstream or crescendo n what not? i'd look at them and ask a rep on some stuff, like skyhighcaraudio. hes really cool and always looking to work with you and will answer any question you have. hes a rep for crescendo

idea22.jpg ALL CREDIT TO XX1 FOR DC BANNER 3178gvp.jpg

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

strapping 2 amps together ? like bolting them next together? using bungy cables to hold them down? or wiring separate amps to each sub

Link to comment
Share on other sites

no vs thread's man.. not trying to be a rent a mod

but have you ever heard of soundstream or crescendo n what not? i'd look at them and ask a rep on some stuff, like skyhighcaraudio. hes really cool and always looking to work with you and will answer any question you have. hes a rep for crescendo

I'm open to suggestions :)

2010 HHR LT - DNX 6160 - sony xec-700 - sony xm-4040 for door mids - XM-6020 for tweets in a-pillar - saz1500d v1 - VVME RD-12 1.75 f^3 32hz

guru and president of the "cheap asses trying to beat up the block with bargain bin woofers" club

Link to comment
Share on other sites

crescendo, and their super tweet's are wicked.. i personally havent heard them in person, but they sound so good on every youtube video (yeah yeah..) and everyone on here seems to love them and that's there choice of mids n highs

idea22.jpg ALL CREDIT TO XX1 FOR DC BANNER 3178gvp.jpg

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

strapping 2 amps together ? like bolting them next together? using bungy cables to hold them down? or wiring separate amps to each sub

Link to comment
Share on other sites

I picked up a sony xec-700 today for $30. Good matching addition to my xm 4045.

Going to run tweets on their own channel and mids on their own channel

Wish I got this before the vifa's and I'd still have em. Well, one at least since the other 2 were DOA...

Also I was going more for a higher powered SQ tweeter vs a super tweeter that just helps keep up with extreme SPL

2010 HHR LT - DNX 6160 - sony xec-700 - sony xm-4040 for door mids - XM-6020 for tweets in a-pillar - saz1500d v1 - VVME RD-12 1.75 f^3 32hz

guru and president of the "cheap asses trying to beat up the block with bargain bin woofers" club

Link to comment
Share on other sites

I have some nice vifas if you want to run them. I can sell them 40 a pair shipped, they are much better than those.

http://www.parts-exp...number=264-1034

Aww hell yeah. 80w rms and 777hz + :D

pm me your paypal

it's for 2 right?

BTW how well do you think a sony xm 4045 would power those if running one from each HP channel or 2 bridged in 2 ohm final load?

I don't want tweeters that are too high of an RMS that I would be under powering them

2010 HHR LT - DNX 6160 - sony xec-700 - sony xm-4040 for door mids - XM-6020 for tweets in a-pillar - saz1500d v1 - VVME RD-12 1.75 f^3 32hz

guru and president of the "cheap asses trying to beat up the block with bargain bin woofers" club

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...