Noel989 Posted February 6, 2013 Report Posted February 6, 2013 Looks good How Thick is it? I think I might get some of these http://www.teamprojectdb.com/index.php/store/battery-terminals/product/61-ba30s-battery-terminals-pair If I don't copy you and do my own lol Build Log - http://www.stevemead...-cruiser-el-pt/
8ight Posted February 6, 2013 Author Report Posted February 6, 2013 Looks good How Thick is it? I think I might get some of these http://www.teamprojectdb.com/index.php/store/battery-terminals/product/61-ba30s-battery-terminals-pair If I don't copy you and do my own lol Thanks man! The aluminum stock I used was 1" x 1/4" I think it should be sufficient for my power level, couldn't find anything thicker at Ace. I'm gonna hate
8ight Posted February 12, 2013 Author Report Posted February 12, 2013 It's the first box I've gotten out of Torres (I have limited space) that satisfies Incriminator recommendations all around (3.5 net per driver, 34Hz tune) without having too little port area. I'm gonna hate
HomeGrown Posted February 17, 2013 Report Posted February 17, 2013 Congrats on the Job Bus bars? You know it! Never tried making them before so here are some pics of the practice run Failures First finished set, not bad if I do say so myself Installed! Had to trim the ground bar so it wouldn't hit my hood when it's closed, I trimmed the other to match but didn't get a picture, also changed up some cable routing from what's shown not bad for your first try if you need help LMK HG Customs Metal working
BastardRam ATX Posted February 18, 2013 Report Posted February 18, 2013 Damn man, some progress has been made since I last saw this thread! It's coming along really nicely. :] 2005 Dodge Ram 1500 Regular CabPioneer MVH-P7300Orion 800.4Planet Audio Big Bang series 6.5 componentsJL G17002 Diamond Audio D610D4's Build log women drivers no survivors
8ight Posted February 18, 2013 Author Report Posted February 18, 2013 Thanks to both of you! Hopefully the next bars are more cosmetically appealing, definitely changing my process a little and drilling them at my friends shop so I can use his nice tap and die set as well as his drill press. I'm gonna hate
stroupe79 Posted February 18, 2013 Report Posted February 18, 2013 look forward to seeing the box build, everything looks good so far...keep it up... http://www.stevemead...cherokee-build/ 2005 Jeep Grand Cherokee Alpine CDE-hd148bt Alpine PKG-RSE2 PRV Audio (4) 6MB200 front/rear doors PRV Audio (4) TW350Ti dash/rear doors Kicker KX350.4 Obsidian Audio (1) 18 D4 v2 revamp (2) Stereo Integrity HT 18d2DC Audio 1.2k5.25ft^3 tuned @34hz revamp Infinite Baffle Cpillar AudioTechnix 60mil deadenerKnuKonceptz & SkyHigh wire (complete setup)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.