Question Mark Posted November 20, 2012 Report Share Posted November 20, 2012 The box design is designed for my dd-1510a and I would like to see some feedback. The recomended net volume of the box is 1.5cu ft. For the port area it's 24sq inches and 23 inches for length. The woofer will get wired down to 2 ohm load and be powered by a Mosconi AS 100.2 (500W bridged) My numbers are following: 1.48cu f3. as net volume. 21,4 sq inches of port area and 19.7 inch length of the port. As a result of this, the tuning is 40.22Hz. The curve is very similare as the recomended one, but a tiny bit lower peak. Any feedback is greatly appreciated. Link to comment Share on other sites More sharing options...
Joe X Posted November 21, 2012 Report Share Posted November 21, 2012 If you want it to peak less tune lower. Many designs are tuned lower -like 36-38 with DD subs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.