kickass audio Posted December 8, 2012 Report Share Posted December 8, 2012 Up for sale are parts I have from dell that have never been used (except for the one keyboard that i used for parts on a buddies computer) only taken out of the package for pictures. First up are 3 keyboards for an Inspiron 6000 laptop (may fit other models, check the part number or simply ask me) One of the keyboard I had taken 4 keys off of to repair a friends keyboard that had missing keys. The other two have never been used at all. Next is the 15.4" 1280x800 iirc resolution lcd for an dell inspiron 6000 (again it will fit other models but please ask me first) this was only taken out of the plastic to show the screen was not cracked. It includes the wire harness that plugs into the back to operate the inverter and display board. Next is the display bezel and backing for the inspiron 6000. It comes with the outer edge plastic used to cover the inner screen area, preinstalled wifi antennas, latch with retaining spring and rubber bumper pads. And finally is a new in package motherboard for an dell dimension e520 computer (this fits a ton of other models) It is just the motherboard and setup cd for flashing the bios and drivers for the computer but i can throw in a pentium 4 with hyper threading for free (dont hate, i used the p4 on the e520 and it performs great). I am more looking to get rid of all of these so im going to go with $100 plus shipping for all of these, offers are welcome. 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
kickass audio Posted December 10, 2012 Author Report Share Posted December 10, 2012 bump!! 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.