Box Design for DD 9512 on Audioque aq2200d

[AZaudio]

Trying to come up with a box design for a Digital Designs 9512 1.5ohm wired to .75 on an Audioque aq2200.

29" Length X 40" Width X 29" Height is the space I have to work with.

I had something in mind like 2.5cu tuned to 32hz, but other suggestions are appreciated. Also I do not have an idea of port size yet.

[Joe X]

So here is a suggestion if this is for Your SUV, this sub behave nice on that tuning:

>> Modded to 3 cubes net on OPs request <<

Enclosure Specifications:

Fb = 36 Hz

Vb = 3 ft^3

External Height = 17 in

External Width = 35.5 in

External Depth = 16 in

Port Width = 3 1/4 in

Cut Sheet List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 35 1/2 x 16

Left & Right Sides =

Side 1 = 14 1/2 x 14 3/4

Side 2 = 15 1/4 x 14 3/4

Front = 31 1/2 x 14 3/4

Back = 35 1/2 x 14 3/4

L Port Internal Assembly Parts:

Front to Back = 11 1/4 x 14 3/4

Extension = 9 7/8 x 14 3/4

Assembly guide (generic dimensions):

Any changes let me know.

[SlamminBeats]

id go bigger than 2.5 cubes man. i have mad xp with dd 95s

do 3 cubes especially on that power

[AZaudio]

See I was thinking bigger but I hadn't read anything about going higher than 2.5 cubes.

Thanks Joe!! Any Ideas about going 3 cubes?

[Joe X]

You can do 2.75 cubes without an issue. But I just can change the above to what you want.

[AZaudio]

Thanks for your time Joe. I'm gonna go with Slammin on this because I know he and Bumb4life have played around with a few DD subs.

If you could make a 3 cube design, that would be awesome!

[Joe X]

Done, if you want to do port optimizations I'll post some stuff on that.

[SlamminBeats]

go for 45 sq inches of port too. 32 hz is way to low. If you want low lows tune to 34-36 at the lowest. If you want to still put up some decent numbers do 37-40

[AZaudio]

Thanks for the advice Slammin, noted.

[juniorbrand]

So here is a suggestion if this is for Your SUV, this sub behave nice on that tuning:

>> Modded to 3 cubes net on OPs request <<

Enclosure Specifications:

Fb = 36 Hz

Vb = 3 ft^3

External Height = 17 in

External Width = 35.5 in

External Depth = 16 in

Port Width = 3 1/4 in

Cut Sheet List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 35 1/2 x 16

Left & Right Sides =

Side 1 = 14 1/2 x 14 3/4

Side 2 = 15 1/4 x 14 3/4

Front = 31 1/2 x 14 3/4

Back = 35 1/2 x 14 3/4

L Port Internal Assembly Parts:

Front to Back = 11 1/4 x 14 3/4

Extension = 9 7/8 x 14 3/4

Assembly guide (generic dimensions):

Any changes let me know.

what's up man.. i need your help.. i'm from brazil and i have a Passat variant 2013 VW, i need one box perfect for my car for 2 digital designs 9512.. you can help me? i want the perfect bass, i love bass hahaha... so if you can send to me a email in [email protected] thx bro