DR.TINGTING!!! Posted December 28, 2012 Report Posted December 28, 2012 Hmm that's interesting. Why Ford why you gotta do this to me? Anywho how do I deal with this should I install a second boot or is there some black magic ish I can try?
Team_DC-Derrick Posted December 28, 2012 Report Posted December 28, 2012 I had to drill through mine, then knock down the hole so it wasnt sharp with a bit you hit with the hammer, and ran it through the plastic hose... it was a bitch doing that for 3 runs per door The DC Integra 3 18s to 6 15 build log Team_DC-Derrick's Youtube Team DC Audio where theres a will theres a wall....... I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones
DR.TINGTING!!! Posted December 28, 2012 Author Report Posted December 28, 2012 Is that a good idea since this is an electrical connector?
Leo1103 Posted December 28, 2012 Report Posted December 28, 2012 Think he was talkin about the actual doors, not the plug 2002 Honda CR-VAlpine 9887My BuildRebuilding... Second Skin Damp 4 DC XL 15's 2 DC 5ks Singer 320 amp 6 cap banksSky High wire 2 VM-1's OM-1 all under window line Team DC Audio Obama has a law he's trying to pass right now, trying to ban Leo for being a threat to children everywhere.EDIT: Not in a JP kind of way. I thought I was going to die from all the jizz filling my ears.
DR.TINGTING!!! Posted December 28, 2012 Author Report Posted December 28, 2012 Then would it make sense to run another loom between the door and the car?
mikelbolton Posted December 28, 2012 Report Posted December 28, 2012 If you're just slipping a run of speaker wire, I would think that you could push that connector outside of the rubber bushing, then slide a piece of speaker wire into the conduit. Haven't seen that one yet though 2011 Chevrolet Aveo(click for build log)Clarion NX-603SKAR 4500.1DIraggi 320A alt Knukonceptz 1/0 Kollosus Fleks Cable8 AWG Sky High Car Audio OFC 1/0- Sky High Car Audio 2- XP3000 XS Power BatteriesSMD VM-12- 12" Ascendant Audio Mayhems Toolmaker Fuse block Toolmaker Bus Bars (Last Season scores 1-15" Mayhem) 145.2 dB- Sealed @ NSPL World Finals (9/28/14) 148.1 dB- Hardcore @ NSPL World Finals (9/27/14) 150.23-- Hardcore on 4500 Watts!!!! New Build (2015, 2-12" Mayhems) 146.9- Sealed on dash 149.6 dB- Hardcore in Kick (No wall 0-24" Hardcore)
DR.TINGTING!!! Posted December 28, 2012 Author Report Posted December 28, 2012 If you're just slipping a run of speaker wire, I would think that you could push that connector outside of the rubber bushing, then slide a piece of speaker wire into the conduit. Haven't seen that one yet though Then where would the wire go into the car? I'm not if I completely understand what you're saying and I'm planing to do 3 16 gauge or 14 gauge runs would that still work?
Team_DC-Derrick Posted December 28, 2012 Report Posted December 28, 2012 Pull out the loom on the frame side, see if you can push it through there, if so do it, thats how I had to do it on my car, and it suuucked... Ill go out and take a pic and post it to show you what im talking about lol The DC Integra 3 18s to 6 15 build log Team_DC-Derrick's Youtube Team DC Audio where theres a will theres a wall....... I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones
Team_DC-Derrick Posted December 28, 2012 Report Posted December 28, 2012 through the grommet piece from the inside of the car, to a hole drilled and cut down in the door. I cut a cut into the plastic and pulled it out of it then taped the shit out of it after I was done... Had the fender off too to make it easier The DC Integra 3 18s to 6 15 build log Team_DC-Derrick's Youtube Team DC Audio where theres a will theres a wall....... I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones
DR.TINGTING!!! Posted December 29, 2012 Author Report Posted December 29, 2012 My doors have the connector on the frame not the door. Is it safe to drill the frame? I was considering just taking the door off and adding a loom so nothing is exposed but I don't really want to do that if I don't have to. I was thinking of using one of these http://www.jegs.com/i/Electric-Life/366/4301-70-011/10002/-1?parentProductId=755579 http://www.jegs.com/i/Electric-Life/366/5050-10-099/10002/-1?parentProductId=755579
Recommended Posts
Archived
This topic is now archived and is closed to further replies.