all4spl Posted January 28, 2013 Report Share Posted January 28, 2013 This much space, 19" H x 39.5" W x 16" D and that is the MAXIMUM external dimensions. This will give you room to mount the sub/subs facing up and approximately 6" of space from the rear of the hatch. Just looking for ideas as I am out of them, don't get me wrong I like my current box but I am always looking for new ideas. Other info; this is a 4dr hatch vehicle, 4500watts behind the subs for power, currently using 2 12s. Looking for something different I guess I currently have a 4cuft box ported to 33Hz and it does good just wished it moved more air. So anyone with some ideas feel free to post em up! Retired from SPL again.... 2016 IASCA Truck/Trunk 2 Champion 151.8db 2016 IASCA Truck/Trunk 2 World Record Holder Link to comment Share on other sites More sharing options...
REVOofRustler Posted January 28, 2013 Report Share Posted January 28, 2013 You could squeeze a couple of 15's in there. Here's a quick little thing in Torres. The one thing is that the port width is the same distance between the port and the hatch. I'm sure that could be fixed with a bit of tweaking, though. 2002 Dodge Dakota 4.7 club cab - Sold 2004 Audi S4 Avant - Fi and Crescendo - Stock Bose System - http://www.stevemeadedesigns.com/board/topic/147725-2002-dodge-dakota-end-of-the-road/?hl=%202002%20%20dakota 136.4 Sealed @ 29hz 137.0 Drivers window open @ 26hz Link to comment Share on other sites More sharing options...
Omega5002 Posted January 28, 2013 Report Share Posted January 28, 2013 You could squeeze a couple of 15's in there. Here's a quick little thing in Torres. The one thing is that the port width is the same distance between the port and the hatch. I'm sure that could be fixed with a bit of tweaking, though. Your width is way off by 30 inches 2003 Kia Sorento Team Subsonic LowsTeam Bassin' on a Budget2016 Rebuild Under Construction Best score: 150.2 at 40hz (3k, 2 Custom HDC3 15's) Usaci style(door open, in the kick) Link to comment Share on other sites More sharing options...
REVOofRustler Posted January 28, 2013 Report Share Posted January 28, 2013 You could squeeze a couple of 15's in there. Here's a quick little thing in Torres. The one thing is that the port width is the same distance between the port and the hatch. I'm sure that could be fixed with a bit of tweaking, though. Your width is way off by 30 inches Ah crap! It seemed too good to be true! Sorry about that, OP! 2002 Dodge Dakota 4.7 club cab - Sold 2004 Audi S4 Avant - Fi and Crescendo - Stock Bose System - http://www.stevemeadedesigns.com/board/topic/147725-2002-dodge-dakota-end-of-the-road/?hl=%202002%20%20dakota 136.4 Sealed @ 29hz 137.0 Drivers window open @ 26hz Link to comment Share on other sites More sharing options...
all4spl Posted January 28, 2013 Author Report Share Posted January 28, 2013 This was my last design I did when brainstorming a new idea, its 4 cubes after displacement (bracing and double baffle NOT shown) and tuned at 35Hz. Retired from SPL again.... 2016 IASCA Truck/Trunk 2 Champion 151.8db 2016 IASCA Truck/Trunk 2 World Record Holder Link to comment Share on other sites More sharing options...
all4spl Posted January 29, 2013 Author Report Share Posted January 29, 2013 Up for more ideas... Retired from SPL again.... 2016 IASCA Truck/Trunk 2 Champion 151.8db 2016 IASCA Truck/Trunk 2 World Record Holder Link to comment Share on other sites More sharing options...
Guest Posted January 29, 2013 Report Share Posted January 29, 2013 that port is too skinny. even if there is enough port area, all that air has to fit in that little slit. you'll likely end up with port noise Link to comment Share on other sites More sharing options...
all4spl Posted January 30, 2013 Author Report Share Posted January 30, 2013 I dunno I am out of ideas, been contemplating just ripping it all out cause with the space I have I would probably have to go down to 10s or I dunno. Retired from SPL again.... 2016 IASCA Truck/Trunk 2 Champion 151.8db 2016 IASCA Truck/Trunk 2 World Record Holder Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.