Reed Farrar Posted February 17, 2013 Report Share Posted February 17, 2013 So im looking to build a ported box for my 2 e10 sundown subs. this box has to be ported because i know the difference in sound with sealed and ported with sundown, and ported is the way to go with this brand of subs. i listen to metal and a little bit of rap but i still want my lows to be really nice since i still do listen to rap and the lows of bass drops in metal. i have a 2001 oldsmobile alero. the maximum dimensions i could do to fit in my trunk are 34 inchs wide, 14 1/2 tall, and 30 inchs long. i want 2 separate chambers so the subs will be more punchy. and to be specific i want a vented box. so if anybody could help me out with any box building wisdom. this is my first box build and i dont want to screw up. if there is any more information i left out please let me know. also the recommended box ft^3 are 1.0 - 1.25 @ 35 hertz. i dont know if i would be better off with maybe 40 hz since i listen to metal and i still dont want the highs to be crappy. so please help me out any knowledge is appreciated. Quote Link to comment Share on other sites More sharing options...
stroupe79 Posted February 17, 2013 Report Share Posted February 17, 2013 35hz should be fine what kind of amp are you going to run them with? Quote http://www.stevemead...cherokee-build/ 2005 Jeep Grand Cherokee Alpine CDE-hd148bt Alpine PKG-RSE2 PRV Audio (4) 6MB200 front/rear doors PRV Audio (4) TW350Ti dash/rear doors Kicker KX350.4 Obsidian Audio (1) 18 D4 v2 revamp (2) Stereo Integrity HT 18d2DC Audio 1.2k5.25ft^3 tuned @34hz revamp Infinite Baffle Cpillar AudioTechnix 60mil deadenerKnuKonceptz & SkyHigh wire (complete setup) Link to comment Share on other sites More sharing options...
Reed Farrar Posted February 17, 2013 Author Report Share Posted February 17, 2013 1200 watt rms brutus hifonics amp. i already have everything wired and i dmm it but im just looking to build a box since the box i have now is junk. oh ya and it wired at 1 ohm if that matters Quote Link to comment Share on other sites More sharing options...
stroupe79 Posted February 17, 2013 Report Share Posted February 17, 2013 you'll want to run 1 cube per sub with that power... Quote http://www.stevemead...cherokee-build/ 2005 Jeep Grand Cherokee Alpine CDE-hd148bt Alpine PKG-RSE2 PRV Audio (4) 6MB200 front/rear doors PRV Audio (4) TW350Ti dash/rear doors Kicker KX350.4 Obsidian Audio (1) 18 D4 v2 revamp (2) Stereo Integrity HT 18d2DC Audio 1.2k5.25ft^3 tuned @34hz revamp Infinite Baffle Cpillar AudioTechnix 60mil deadenerKnuKonceptz & SkyHigh wire (complete setup) Link to comment Share on other sites More sharing options...
Reed Farrar Posted February 17, 2013 Author Report Share Posted February 17, 2013 alright so since i want to build a vented box what do you think the dimensions could be? there are some box building softwares but i really dont trust downloading anything cause i dont want my mom to freak out if i get a virus or something lmao. Quote Link to comment Share on other sites More sharing options...
Reed Farrar Posted February 18, 2013 Author Report Share Posted February 18, 2013 nobody can help me? Quote Link to comment Share on other sites More sharing options...
HowLowCanYouGo Posted February 18, 2013 Report Share Posted February 18, 2013 Well considering im building a quad sub box at the moment i should be able to help. I would face the subs out for a start, Make it 28" wide. 14" deep 12" tall. Then wall it off in the middle of the box if you want to then make the ports slot ports 2" wide on the side of the box facing the back of the trunk. now thats just some ryff numbers but it should help ya. its kinda hard to explain without pictures Quote Nothing for now... Did you get that scar tissue when you got your vagina installed? I'd grab Adam's ass and look him in the eyes for a demo of nates truck. Link to comment Share on other sites More sharing options...
Reed Farrar Posted February 18, 2013 Author Report Share Posted February 18, 2013 I want to make it vented. The only reason I dont want ports is because my trunk rattles alot. Im facing the subs to the cabin. Are you making ports for yours? And if you could take some pics of your build when done it would be appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.