Carbon Posted March 1, 2013 Author Report Share Posted March 1, 2013 Civic sedan Link to comment Share on other sites More sharing options...
Joe X Posted March 1, 2013 Report Share Posted March 1, 2013 Likely you will need to use some trunk space as well to get 12 cubes net + displacements. Link to comment Share on other sites More sharing options...
Carbon Posted March 1, 2013 Author Report Share Posted March 1, 2013 I have some pics in here Joe http://www.stevemeadedesigns.com/board/topic/162810-carbons-56k-no-way-es-walled-civic-build-a-mugen-si-build-log-es/ Alot are saying I will not need to. I have suggested that before as well Link to comment Share on other sites More sharing options...
Joe X Posted March 1, 2013 Report Share Posted March 1, 2013 Here's some sketch, not taking advantage of the space below the step for now, I know my dimensions will be off due to the method I used to get them Link to comment Share on other sites More sharing options...
OBI Posted March 1, 2013 Report Share Posted March 1, 2013 IMO if you can't calculate your own air space and figure the tuning out, this wall might be alittle too complex for you. Please dont take offence by this. But with my wall I split it up into sections. For my wall I had irregular trapezoids and pyramids to calculate, because I wanted to squeeze every inch of space out of my wall. Link to comment Share on other sites More sharing options...
WillPwn4Food Posted March 1, 2013 Report Share Posted March 1, 2013 IMO if you can't calculate your own air space and figure the tuning out, this wall might be alittle too complex for you. Please dont take offence by this. But with my wall I split it up into sections. For my wall I had irregular trapezoids and pyramids to calculate, because I wanted to squeeze every inch of space out of my wall. I just don't think he thought about splitting it into regular shapes and calculating area of each. Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus. Link to comment Share on other sites More sharing options...
Mobileaudio25 Posted March 1, 2013 Report Share Posted March 1, 2013 Once you get specs and design take measurements and caluculate the cubic feet of the left over trapazoids, triangles ect.. Just google area of Triangle/trapazoid if you don't know them. I suggests doing each calculation/measurement a few times . As far as port that's a little out of my league ha Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.